Homemade oil for my vape pen

CoB_nUt

Well-Known Member
I have no issue with you asking questions my dude. I initially bought the mod to stop smoking tobacco. So, it was strictly for ejuice. I already had and was using pen type battery for my oil to vape as well as an aspire nautilus kit that I started experimenting on using my first liquidizer.....ej mix....yuuuuuck!!!! :spew:
If I were to buy another vape mechanisim for my oil today,It wouldn't be a sub ohm mod.....strike that, I can't say that. I'd have to do a lil research before purchasing again.
I'm sure there is better tech out there now. Haven't purchased any new equipment to vape outside of carts and cotton and wire(I also have a RDA tank for the mod)in a lil over 2 years.
 

CoB_nUt

Well-Known Member
Yea I really like the extract solutions. PG only and the "natural emulsifier". I was going to get the wax liquidizer when researching oil thinners. Had a buddy already using it so I decided to try something different out and compare them.
Tastewise they are pretty similiar(unflavored)I like Extract Soulutions better tho.
I probably didn't give it a fair shot because I only tasted it in a cart or carts he made, I didn't use it myself.
After I purchased the ES and made my carts, HE liked mine better as well(I think it's because my tech and concentrate are just made better than he does his)
It came down to taste,(small sample size for WL on my part I'll admit)seperation,or lack thereof, and price. I chose ES.
 

CoB_nUt

Well-Known Member
Just grab the lil 30 ml bottle or kit. Give it a try. If you like WL, You'll like ES.
Oh yea, I've never tried ANY flavored thinner. Don't like flavored wraps for blunts, and I certainly don't want or need synthetic flavors or terps added to my vape oil.
My oil tastes just fine on it's own. As do my flowers.
This is just my personal preference. I'm not hating or shitting on anyone that does add flavors or manufactered terps to their vape juice. To each their own.
 

Go go n chill

Well-Known Member
Nah NEVER even close to full tilt on my mod when vaping oil. 30-40 watts tops and that's on soft mode(it has 3 settings as far as hits go). I use Extract solutions at 3:1 ratio(with winterized rosin) qwet or qwizo I run 2:1 mainly,but have used 3:1. It's bulkyness is the only thing I dislike about it. It bulges out any pocket you put it in and has a lil weight to it. It's a sweet lil mod.
3to1? 3 parts cutting agent 1 part extract?
 

CoB_nUt

Well-Known Member
3to1? 3 parts cutting agent 1 part extract?
Yes. 3 mls to a gram of concentrate. Turn 1g into 4gs. Depending on the extract, sometimes I'll go down to 2:1(rosin) I use 2:1 mainly when doing solvent runs but have also done 3:1 with them.After doing my own for a while, I see why the cart game is the "in" thing now. You can make your own mint if you have the client base, and the numbers scale up really easily. Low over head for for a large profit margin, IF that's your thing.
 

BillyBlanks420

Well-Known Member
Yes. 3 mls to a gram of concentrate. Turn 1g into 4gs. Depending on the extract, sometimes I'll go down to 2:1(rosin) I use 2:1 mainly when doing solvent runs but have also done 3:1 with them.After doing my own for a while, I see why the cart game is the "in" thing now. You can make your own mint if you have the client base, and the numbers scale up really easily. Low over head for for a large profit margin, IF that's your thing.
Do you feel like you get bigger hits with a 3:1 ratio? Recently I mixed mine up at a 1:1 ratio to see how well they did, and I'm not getting good hits off my master vape battery, it seems like it takes a while for the oil to loosen up and by then the battery is already blinking saying I've held it down to long.
It hits better after the oil is warmed up and a more runny consistency, definitely gets me higher but the annoyance of having to hit it a couple of times to even get a decent hit leaves me thinking if I thinned it out more I would get better hits. Right now I end up heating it up so much to get a good hit the oil likes to fly right up the tube and into my mouth...

Think I'm gunna order from Hamilton next time find a better pen battery
 

CoB_nUt

Well-Known Member
Do you feel like you get bigger hits with a 3:1 ratio? Recently I mixed mine up at a 1:1 ratio to see how well they did, and I'm not getting good hits off my master vape battery, it seems like it takes a while for the oil to loosen up and by then the battery is already blinking saying I've held it down to long.
It hits better after the oil is warmed up and a more runny consistency, definitely gets me higher but the annoyance of having to hit it a couple of times to even get a decent hit leaves me thinking if I thinned it out more I would get better hits. Right now I end up heating it up so much to get a good hit the oil likes to fly right up the tube and into my mouth...

Think I'm gunna order from Hamilton next time find a better pen battery
I've found the 1:1 ratio to be too thick using any of my concentrates in a tank/cart.
The only time I've used 1:1 ratio iswhen I use my RDA tank. Nice huge hits. But the cotton doesn't last very long and I have to rebuild the coils after about a week of vaping 1:1 ratio as opposed to 3 weeks.
Sounds like your mix is too thick for the battery or cart used.
 

Go go n chill

Well-Known Member
I've found the 1:1 ratio to be too thick using any of my concentrates in a tank/cart.
The only time I've used 1:1 ratio iswhen I use my RDA tank. Nice huge hits. But the cotton doesn't last very long and I have to rebuild the coils after about a week of vaping 1:1 ratio as opposed to 3 weeks.
Sounds like your mix is too thick for the battery or cart used.
Man, I don’t want to have to rebuild anything. Takes all the fun out of getting lyfted
 

reallybigjesusfreak

Well-Known Member
Do you feel like you get bigger hits with a 3:1 ratio? Recently I mixed mine up at a 1:1 ratio to see how well they did, and I'm not getting good hits off my master vape battery, it seems like it takes a while for the oil to loosen up and by then the battery is already blinking saying I've held it down to long.
It hits better after the oil is warmed up and a more runny consistency, definitely gets me higher but the annoyance of having to hit it a couple of times to even get a decent hit leaves me thinking if I thinned it out more I would get better hits. Right now I end up heating it up so much to get a good hit the oil likes to fly right up the tube and into my mouth...

Think I'm gunna order from Hamilton next time find a better pen battery
That’s a really good point. I think I’m gonna run an experiment and make one 1.5-1 and 2.5-1 and see what the difference is like.
 

cronict1

Member
gentlemen i apologise profusely for the dumb question but im kinda ill atm, can i create BHO, mix with PG and vape? i cannot winterize with ethanol due to islamic people asking me for this stuff, do i need to buy the micron filters? or can i just vape? you know like wax liquidizer i remember somewhere someone saying you dont need to winterize using this
 

burrheadd

Well-Known Member
gentlemen i apologise profusely for the dumb question but im kinda ill atm, can i create BHO, mix with PG and vape? i cannot winterize with ethanol due to islamic people asking me for this stuff, do i need to buy the micron filters? or can i just vape? you know like wax liquidizer i remember somewhere someone saying you dont need to winterize using this
Why do Islamic people keep asking you for this stuff?
 

uncle!mumbles

Active Member
gentlemen i apologise profusely for the dumb question but im kinda ill atm, can i create BHO, mix with PG and vape? i cannot winterize with ethanol due to islamic people asking me for this stuff, do i need to buy the micron filters? or can i just vape? you know like wax liquidizer i remember somewhere someone saying you dont need to winterize using this
tried a search for 'vegetable glycerin extraction'...? uses heat only; double boiler or oven. no alcohol; you can get kosher VG, not sure if that will fit the bill for your need? or you can just use the vape juice to extract, i use juishy 70/30 (vg/pg) vape juice... marijuanabreak.com has a step by step i've been following... sort of.
 

macsnax

Well-Known Member
So I've been making a few batches of vape juice, using vapeur terp clear and the filters. It seems to work just fine and I've been getting some tasty results. I'll post pics later, I'm at work. But, have any of you used just terpenes and the filter? I want a stronger hit, like one and done, for when I'm at work. I emailed VT and they told me to look at their guide, there's nothing about this in their guide.......lol. So what say you?
 
Top