charface
Well-Known Member
You are already here. LolTag me too bro.! I just got my heat plates today
You are already here. LolTag me too bro.! I just got my heat plates today
I feel a Vaccum pump would cause an internal blow out. When taking apart the syringe filter I could tell the filter is incredibly fragile and thinMaybe you could pull the concentrate through the filter with a vacuum pump and a couple of fittings
Next time you do it some before and after pics would be cool.I feel a Vaccum pump would cause an internal blow out. When taking apart the next syringe filter I could tell the filter is incredibly fragile and thin
If the filters work then surely we can beef them up or DIY something better!?I feel a Vaccum pump would cause an internal blow out. When taking apart the syringe filter I could tell the filter is incredibly fragile and thin
I have seen the advertisement for itLike I said, most of us have no idea because we haven't tried it.
Where did you hear it from?
I can see that letting sit to cool would be helpful but why not get it really cold?
Anyway I have no experience so Ill leave you to it.
But if you get great results please let us know.
NiceSo I am reporting back a happy high man. The results exceeded my expectations. After the .22 micron syringe filter the juice came out so clear I was scared that the good stuff was caught in the filter.
Upon vaping it i could feel that the affects are still there with no decrease in potency. Now will be the wait test to see if the solution turns into the infamous black color over time.
Do the filters fit a regular syringeI want to make sure what I am about to do is ok to do.
I am going to be doing rosin and plan to mix .5g of rosin with 1ml of wax liquidizer pineapple flavor. Getting it to mix then soaking the mix with a syringe. Waiting 2-6 hours with the mix in the syringe to then use a .2 micron syringe filter to filter it.
I want to avoid the juice turning black while vaping from the fats and lipids burning up.
Is this a good plan? Input would be greatly appreciated.
I just ordered 10Syringe Filters PVDF ( Polyvinylidene... https://www.amazon.com/dp/B06XWC3MS7?ref=yo_pop_ma_swf
Fyi while researching I read it is best to fill the syringe, insert the filter and take the plunger out. Let gravity send the juice through the filter into a shot glass or something.
You can use the plunger but you risk blowing out the filter.
It took 2-4 hours for 1.5ml to filter through into the shot glass
The syringes are on the usually purchased with link on the same page you got the filters fromI just ordered 10
Will do I will make another batch in a few weeks I will post in this thread with resultsNext time you do it some before and after pics would be cool.
Maybe even tear the filter apart so we can see all the crap.
As long as it is luer lockDo the filters fit a regular syringe
Hey man check out this thread,Hold on a sec, these filters do the job of winterising without lowering the temperature?
How can you use bho with this method ?
Pure blasted and purged bho filtered in this fashion.. keep everything warm? Like really warm?
What it you save your filters and run them thru the same process as bud?but like I’ve said before you lose .25 mL of product every time you use one of those filter cartridges
I’ve have soaked them in everclear before and I couldn’t get the remaining product out of them.What it you save your filters and run them thru the same process as bud?
I have noticed if you use the .22 filter assembly they work better warmed up a little bit.Hold on a sec, these filters do the job of winterising without lowering the temperature?
How can you use bho with this method ?
Pure blasted and purged bho filtered in this fashion.. keep everything warm? Like really warm?
Have you tried a press. I really don't want to give you the impression that I know anything at all. I'm just looking for answers. You have a question that sooner or later I'll have, too, so I'd be glad to help you look. I'll have to learn a little about it first. At least one or two nights finding out exactly what you are doing. I haven't seen these filters.soaked them in everclear before and I couldn’t get the remaining product out of them.