WeedSexWeightsShakes
Well-Known Member
Looks good, but you call this dripping with trics?
$400 to light a 4x4
- Thread starter athomegrowing
- Start date
Looks good, but you call this dripping with trics?
coreywebster
Well-Known Member
Probably not going to do it on that budget for that space. Best bet would be to check out LED gardeners site and get a strip build made. If you can strip a wire or wire a plug its simple.
Be about $600 for a non DIY option.
Olive Drab Green
Well-Known Member
Strips are actually even above QBs and COBs in terms of efficiency. They’re also the cheapest build. Samsung F Strips or Bridgelux EB Strips
Yodaweed
Well-Known Member
Great side lighting but i think this guy is looking to light his tent up wall to wall. Pretty sure those strips got some of the worst intensity levels of any lighting source currently used to grow canna. They are mostly for micro grows , so are QB's. Once you move more than 12 inches from them light levels are atrocious.
4x4 grow tent lighting best options are 1000w DE CMH with adjustable ballast, 600w hps with adjustable ballast, 1000w hps with adjustable ballast.
shorelineOG
Well-Known Member
You can find used lights on Craigslist for very cheap. You can get a used hps for a couple hundred bucks, the magnetic ballasts last forever.
WeedSexWeightsShakes
Well-Known Member
athomegrowing
Well-Known Member
True... Just found this.. https://newyork.craigslist.org/brx/grd/d/hydrofarm-hps-430w-grow-light/6704335192.html
Yodaweed
Well-Known Member
You givin me the queer eye again @WeedSexWeightsShakes ?
No sure where you got that info "strips are better" is a pretty stupid statement they are no more effecient than the same exact diode on a different board...
WeedSexWeightsShakes
Well-Known Member
You do you, I’m not here to judge your sexual orientation
I’m here to laugh at the nonsense you type
Olive Drab Green
Well-Known Member
Efficiency-wise, they have a slightly higher micromole per joule ratio than QBs. It’s really simple, I don’t understand what you guys aren’t getting. It’s stupid-simple.
Wow you really have no clue what your saying.
Olive Drab Green
Well-Known Member
Obviously you don’t. The chips & strips differ in their efficiency. Diodes are one thing, I’m talking a difference in board and lamp level efficiency as a whole, based on physical setup and arrangement. The way the materials that make up the are (obviously) completely different physical setups. That plays a roll in their efficiency.
No they really don't....what diode are you even talking about? There's several versions of strips and QB so you statement can't be true no matter how much you want it to be. you haven't given enough info to be right. Even if you gave all the info you would still be wrong so just give up now.
Olive Drab Green
Well-Known Member
I specifically said EB and F strips.
INF Flux
Well-Known Member
Efficiency is a result of how hard you drive the diodes. If QB's and strips are using the same diode, it's up to the builder selecting the driver to determine how efficient it is, no?
Olive Drab Green
Well-Known Member
For instance. The Bridgelux EB strips are 180 lumens per watt. The QB-288 V2 is about 177, board level. I said the difference was very slight, but the strips are less expensive and slightly more efficient.
Olive Drab Green
Well-Known Member
Right, but there’s an “up to” point. There are limits for each.
So yeah your wrong the lm561c is not more effecient than the lm301b call Samsung ask them since you can't read a data sheet.
Yodaweed
Well-Known Member
180 lumens per watt at how many watts? The harder you push them the lower the efficiency....
Similar threads
