tst2015
Well-Known Member
I'm getting ready to start my first grow. Got almost everything ordered and on route. My seeds should be showing up in a day or two and I've been thinking about my tap water quality.
My tap water isn't great and sometimes leaves a noticeable film on sinks...especially my one bathroom that has a beige colored bathroom sink. I suspected high levels of calcium and magnesium...or possibly sodium....so I bought a cheap test kit.
My first test strip was with straight tap water. It showed me:
Free chlorine almost zero
Almost zero hardness
pH about 9 or so (highest reading on the strip)
And alkalinity was at least 240 ppm (also highest reading on the strip)
My next test I put a tiny bit of lemon juice in the tap water...the pH dropped to about 6.8 but alkalinity stayed at least 240ppm
So my noob question is this...can I use this water as long as I adjust pH according to soil levels? Or will this alkalinity cause other issues?
Also, is there something I can do to solve the alkalinity if needed..such as a chemical treatment?
Thanks for any ideas and help with this
My tap water isn't great and sometimes leaves a noticeable film on sinks...especially my one bathroom that has a beige colored bathroom sink. I suspected high levels of calcium and magnesium...or possibly sodium....so I bought a cheap test kit.
My first test strip was with straight tap water. It showed me:
Free chlorine almost zero
Almost zero hardness
pH about 9 or so (highest reading on the strip)
And alkalinity was at least 240 ppm (also highest reading on the strip)
My next test I put a tiny bit of lemon juice in the tap water...the pH dropped to about 6.8 but alkalinity stayed at least 240ppm
So my noob question is this...can I use this water as long as I adjust pH according to soil levels? Or will this alkalinity cause other issues?
Also, is there something I can do to solve the alkalinity if needed..such as a chemical treatment?
Thanks for any ideas and help with this