Quantum Board Help

[NRPS71]

Hello,
I could really use some advice with this.
I picked up a a 3 quantum board set off of Horticulture Lighting Groups site along with a Meanwell HLG-320H-36A driver. I am either doing something stupid or I bought the wrong driver. I cannot get this to light up. Can someone check the picture out and tell me what I have done wrong? I have tried this with the middle board swapped the other direction too. I have tried searching for videos on this, most of what i find are one or 2 boards. I was hoping 3 would be as easy as the others.
I honestly admit, I do not know what I am doing. Talk to me like a child, draw me pictures

Thanks.
NRPS

 

[Stephenj37826]

Hello,
I could really use some advice with this.
I picked up a a 3 quantum board set off of Horticulture Lighting Groups site along with a Meanwell HLG-320H-36A driver. I am either doing something stupid or I bought the wrong driver. I cannot get this to light up. Can someone check the picture out and tell me what I have done wrong? I have tried this with the middle board swapped the other direction too. I have tried searching for videos on this, most of what i find are one or 2 boards. I was hoping 3 would be as easy as the others.
I honestly admit, I do not know what I am doing. Talk to me like a child, draw me pictures

Thanks.
NRPS

What boards? If 288 you will need 54V. So yes definitely wrong driver. Hlg 320h-c1750 is best for 3 qb288.

Thanks

 

[NRPS71]

Yep QB-288 boards. I don't know how I ended up ordering the wrong driver. I hope Arrow will return it.

 

[NRPS71]

I am going to order the Hlg 320h-c1750. How should I wire this together?

 

[boostedhonda]

Series I think

 

[NRPS71]

What boards? If 288 you will need 54V. So yes definitely wrong driver. Hlg 320h-c1750 is best for 3 qb288.

Thanks

Thanks for this info. I have ordered a new driver from Arrow. Is the driver I bought useful to use with a different board? I suppose I could always use a spare light If not, I will try to send it back to Arrow.

 

[skoomd]

Thanks for this info. I have ordered a new driver from Arrow. Is the driver I bought useful to use with a different board? I suppose I could always use a spare light If not, I will try to send it back to Arrow.

Only good for a few 36v COBs in parallel really

 

[Humple]

Thanks for this info. I have ordered a new driver from Arrow. Is the driver I bought useful to use with a different board? I suppose I could always use a spare light If not, I will try to send it back to Arrow.

Only good for a few 36v COBs in parallel really

It's good for QB132s, which are 36v. A four-pack will cost you around $130. Perfect for a 3x3.

 

[NRPS71]

It's good for QB132s, which are 36v. A four-pack will cost you around $130. Perfect for a 3x3.

I might have to do that. The fine folks at Arrow told me they don't do returns.
Nobody to blame but myself. I ordered the wrong one.

 

[Humple]

I might have to do that. The fine folks at Arrow told me they don't do returns.
Nobody to blame but myself. I ordered the wrong one.

Sounds like a great excuse to set up another grow space!

 

[nfhiggs]

I might have to do that. The fine folks at Arrow told me they don't do returns.
Nobody to blame but myself. I ordered the wrong one.

Well, if you can't find a home for it, I might be interested in it.

 

[Viceman666]

I think there is a few cob option at that voltage especially with A driver.. maybe add a few cob like 6 at 50w each maybe and increase your grow space

 

[Humple]

I'd throw up a 3x3 and fill it with four QB132s. Cheap, easy, and really good spread.