Telos 0008
- Thread starter CikaBika
- Start date
340 pound is cost for 4 single cob of 60 watt each.340 pound are 385 eur
60w x 4 cob= 240watt of light from cob for 385 eur.
You can use 2 board at 120 watt each for a 240 fixture. Same power.Much more ppf output.
2 board=160 eur + hlg 240h 75 eur
So 75+160=235 eur.
No need for heatsink at 120 watt.
You can also spend a bit more...
Take 3 board= 240eur. Add 105 for driver
Total is 345 eur and you will have a 320 watt kick ass light that will destroy 4 cob setup.
Clu048 1212 at 60watt will always lower efficiency than board at 110watt
Last edited:
CikaBika
Well-Known Member
What about this??https://horticulturelightinggroup.com/collections/diy/products/135w-led-board-kit
I can buy for now one kit add my 55w cob and later buy another one?
I can buy for now one kit add my 55w cob and later buy another one?
Yeah..try to add shipping cost and custom fees..that ' s why I have been waiting for Italian board so long.Now the Italian board shop are the best deal if you are in EU
Edit:
I answered you pm and asked few question
CikaBika
Well-Known Member
My inbox is empty. I',m lost now..whats are your boards??
tgl sell quantum boards too. 200€ for 134w assembled... https://www.todogrowled.com/gb/hlg-quantum-boards/55-hlg-260w-quantum-board-kit.html
But I need some heat so For now I think my best option are those 3 cobs...
tgl sell quantum boards too. 200€ for 134w assembled... https://www.todogrowled.com/gb/hlg-quantum-boards/55-hlg-260w-quantum-board-kit.html
But I need some heat so For now I think my best option are those 3 cobs...
Rocket Soul
Well-Known Member
I know tgl since some time back, theyre good. I would double check with HLG first though, if they are are an actual distributor.Its very easy to score a dummy quantumboard on alibaba for 30$ and sell it as if it was the real deal. The drivers they are offering are meanwell, but not top of the line drivers like HLG. Btw, if you find out please let me know.
In any case, both of these boards would be a better option than than citi 1212 unless you simply got to have 90cri lights.
In any case, both of these boards would be a better option than than citi 1212 unless you simply got to have 90cri lights.
Sorry,my fault.Now you have message.
Regarding cob, board and heat is the same.If you put 240 watt of whatever light inside a tent,you will have same heat output.Hps can leaD to an higher leaf temperature since hps has more infrared output.But with led, 240 watt of cob or board will have same heat output.
Todogrowled prices are higher than Italian shop.
Again 1 board is 80€
3 board are 240€,
1 hlg 320h is 103€
For 343€ you will have 3 board at 110watt each,passive with no heatsink.Better efficiency and better uniformity compared to todogrowled 260 watt kit at 319€
Of course is even better comparing it to cob.
But it seems to me you already choose you want cob,no matter what.Cob cost more,have lower uniformity and lower efficiency but if you are comfortable about them, than go with cob.You should choose what you prefer
CikaBika
Well-Known Member
And who will connect that? i don't know shit about serial/parallel wiring .. my buddy did my cobs for me and he moved out..Sorry,my fault.Now you have message.
Regarding cob, board and heat is the same.If you put 240 watt of whatever light inside a tent,you will have same heat output.Hps can leaD to an higher leaf temperature since hps has more infrared output.But with led, 240 watt of cob or board will have same heat output.
Todogrowled prices are higher than Italian shop.
Again 1 board is 80€
3 board are 240€,
1 hlg 320h is 103€
For 343€ you will have 3 board at 110watt each,passive with no heatsink.Better efficiency and better uniformity compared to todogrowled 260 watt kit at 319€
Of course is even better comparing it to cob.
But it seems to me you already choose you want cob,no matter what.Cob cost more,have lower uniformity and lower efficiency but if you are comfortable about them, than go with cob.You should choose what you prefer
Yes but tgl sells whole kits, and italians just sell boards, so I must go to home depo type of stores and search and f my self.. I can only contact them for maybe making whole kits..
