Psylosin
Member
Ok guys this is what I'm planning I'm going to be running a number of qb288s I'm a little bit confused on the driver setup so just looking for someone to confirm I'm correct here.
So I'm looking at running 4x qb288s off of a hlg-480h-c2100b. I'm going to be running the boards at 53.28v 2100ma for 111.6w each. So if I'm doing this correct you would multiply x4 for a total of 446.4w and 213.12v... So for this driver max watts is 481w and constant current region is between 114 and 229v so this is all correct?
So am i correct in this driver for this setup and am i looking at this the right way? and is there a better more efficient way of running these? I'm going to be running 28 lights so if I can cut down the amount of drivers that would be great.
Sorry for a total noob question but I am a noob so it comes with the territory... I was going to post the spec sheets for light and driver but I don't have permissions so I can give more info if needed... Thanks guys!
So I'm looking at running 4x qb288s off of a hlg-480h-c2100b. I'm going to be running the boards at 53.28v 2100ma for 111.6w each. So if I'm doing this correct you would multiply x4 for a total of 446.4w and 213.12v... So for this driver max watts is 481w and constant current region is between 114 and 229v so this is all correct?
So am i correct in this driver for this setup and am i looking at this the right way? and is there a better more efficient way of running these? I'm going to be running 28 lights so if I can cut down the amount of drivers that would be great.
Sorry for a total noob question but I am a noob so it comes with the territory... I was going to post the spec sheets for light and driver but I don't have permissions so I can give more info if needed... Thanks guys!