Which would produce more DO in a DWC?

Budley Doright

Budley Doright

Well-Known Member
Actually it's not hard, I thought the same but if you get it going and slowly lay it in in an angle it works ok. But yes it can grab lol. The dremmel works well, forgot I had one lol. I very rarely use it but should, just got some antler to carve over the winter :).
 
JSB99

JSB99

Well-Known Member
Budley Doright said:
Where did u get the fittings and how much, I'm thinking I need 5 :(. And great job!
Click to expand...
Thanks, man! I've got pretty much all of it put together, and will probably do a wet test today. I'll say this, the bulkheads were definitely worth it! After removing my diy bulkheads, and mounting the new ones, I can tell they are well worth the money!

I needed 5 myself, and it was about $32 for all of them.

4-pack 2" bulkheads
Single 2" bulkhead
 
JSB99

JSB99

Well-Known Member
Something I really like about these bulkheads is that I don't need to add supports under the pipes to hold them up!

20171228_133847-2412x1781.jpg

20171228_133802-2151x1734.jpg

Out of boredom, while waiting for the bulkheads to arrive, I spray primered the pipes, added several layers of clear coat (with some glitter for a psuedo-metallic finish), wet sanded w/2000 grit, buffed with a heavy-cut compound, a fine-cut compound, and a glaze. Then I sealed it with NuFinish. I used to detail my cars and trucks, so I had a lot of stuff just laying around LOL. Anyways, it's hard to tell, but the pipes have a deep, car-coat finish to them. I just wanted to see if I could do it :)
20171228_133629-2363x1791.jpg
 
JSB99

JSB99

Well-Known Member
I use my wetvac to drain leftover water. I set it on my window ledge, and dump it when it gets full. Way easier than trying to roll it to the tub and lift it to dump the water. I was trying to think of a way I could avoid lifting at all. Would putting a 2" drain pipe in the canister to drain it over the window ledge work, or is that going to become part of the vacuum? If so, maybe I could cap the pipe, then uncap it to drain.

Anyone got any thoughts on this?

20171228_142201-1836x2448.jpg
 
kingtitan

kingtitan

Well-Known Member
I have one stainless vac that has a 1.5 or 2" drain with a threaded cap so you should be able to rig up a ball valve and some pipe :bigjoint:

mine looks like this one i found on google

 
JSB99

JSB99

Well-Known Member
Yodaweed said:
You would been better off with 1 plant per bucket
Click to expand...
It's possible, but I don't think there'd be any noticeable difference. But what might be effected is the amount of time it would take for two plants to fill out the canopy, compared to four plants. I believe it would take less time with four plants. Really, I could've had one giant tote in the tent, for a single plant. But it would probably take a couple months of veg to get all the branches spread out to fill out the canopy.
 
Yodaweed

Yodaweed

Well-Known Member
JSB99 said:
It's possible, but I don't think there'd be any noticeable difference. But what might be effected is the amount of time it would take for two plants to fill out the canopy, compared to four plants. I believe it would take less time with four plants. Really, I could've had one giant tote in the tent, for a single plant. But it would probably take a couple months of veg to get all the branches spread out to fill out the canopy.
Click to expand...
I don't think you know how much roots you are gonna have in those buckets, they gonna end up tangling around each other and strangling each other somewhat.
 
JSB99

JSB99

Well-Known Member
Yodaweed said:
I don't think you know how much roots you are gonna have in those buckets, they gonna end up tangling around each other and strangling each other somewhat.
Click to expand...
I knew the roots tangle up with each other, but I wasn't aware that this was causing harm to the roots. I was thinking of putting the airstones in between the two netpots, in an attempt to keep them separated. I was going to to a side by side tote comparison between that, and having the stones right under the netpots. That's the way I grew this last time.

BTW, this will be my second grow with this setup. My first grow turned out pretty decent, for my first time growing in ten years.
 
Yodaweed

Yodaweed

Well-Known Member
JSB99 said:
I knew the roots tangle up with each other, but I wasn't aware that this was causing harm to the roots. I was thinking of putting the airstones in between the two netpots, in an attempt to keep them separated. I was going to to a side by side tote comparison between that, and having the stones right under the netpots. That's the way I grew this last time.

BTW, this will be my second grow with this setup. My first grow turned out pretty decent, for my first time growing in ten years.
Click to expand...
Yea keeping the roots seperate is a great idea, they can definately cause harm to each other when fighting for root space and tangle up like mad.
 
Budley Doright

Budley Doright

Well-Known Member
JSB99 said:
Do you think a wall of bubbles would keep them separate?
Click to expand...
No, air won't keep them apart I don't think, and no need to worry IMO, roots will be fine with two per. I run 6 plants per tote and yes that's too many but not because of roots get strangled, more to do with a extremely bushy canopy, lots of systems run multiple plants with the roots not getting strangled that I can see. Mind you I don't run trees either and do a 25-30!day veg.
 
You must log in or register to reply here.
Top