Thanks!
Day 14 of flowering with the additional qb120s on my rig. Plants are looking healthy and happy so far, what do you think? Qb120s are at 100% running on 2.1a driver, cobs around 80% on a 1.75a driver.
This pic is from yesterday, hopefully this was the final round of defo
Pics from a few hours ago
If I were you I would defoliate a bunch more the bottom foot of those plants won't get any light later in flower. Plants look great what nutrients?Day 14 of flowering with the additional qb120s on my rig. Plants are looking healthy and happy so far, what do you think? Qb120s are at 100% running on 2.1a driver, cobs around 80% on a 1.75a driver.
This pic is from yesterday, hopefully this was the final round of defo
Pics from a few hours ago
whew all that plubming makes me dizzyThanks!
I'm Using a 80/20 Coco perlite mix in 3.2l pots. I have 40 of these arrow drip heads, each plant is getting 2 drippers for a total of 42ml/minute. Currently they are getting around 10 feeds per day, each feed between 1 min to 3 mins Max.
I'm pretty sure they are in the final stages of the stretch, and I'm still getting great light pentration at the bottom. You right tho, I'm hoping I won't be too lazy and have another round this week.
It was so much fun to setup, who knew.. the stuff we'll find ourselves doing for this hobby.
Should be good bro
How do you handle runoff?
At what distance from the plants were you thinking of running the QB120s?
I have a 10 liter container at the bottom, bellow the drain tray. It can last a few days, but I'm looking into a more permanent solution, maybe hooking up a water pump directly to the hose bellow the tray.
Look at the iws brain bucket for the drip and drain, has a float valve when it gets there it empty’s wherever you want it
That's a good question. I would be able to run them at 16" away from plants at max, though moving them closer is no problem. What distance would you recommend if using the lpc-60-1050? Thanks!
I can only share my (admittedly limited) experience. I run four 120s in series on a single fixture, and have only completed the last two-thirds of one full run under them. I've run them as low as 50w per, for 200w total, at 18 inches; and as high as 63.5w per, for 254w total, as close as 8". I finally settled on full power at 12" for the majority of the flowering time. I would imagine that you could park them within a few inches if run at 20w, but you may find the plants can take a lot more than that.
Cool man, thanks. Ima just spend the money and get a bigger driver, probably some good deals floating around out there today.
What driver are you using to run 4x120s in series?
I'm running 4 qb120 in series with a Meanwell hlg-240h-c2100b driver. check the hlg site for the qb120, you can see driver recommendations/options at the bottom.
Two Meanwell HLG-240H-C2100As for two 4xQB120 fixtures.