Newbie in to this vape thing. I have some bubble hash that I want to make into oil for the vape pens. I've seen the methods of using flower to make the oil. But have not seen anyone try using bubble hash. Is there a method using bubble hash im not finding or is this not possible? Any help would be appreciated.
Bubble hash into oil for vape pen?
- Thread starter spaceman
- Start date
swedsteven
Well-Known Member
I put my best bubble hash full melt in my cloud pen with no problem 
Thai_Lights
Well-Known Member
Looks tasty... I saw your posts on Matt rize thread. $200g Lol!!! Too funny bro. Also saw your side by side organic vs botanicare much respect. Do you have Instagram? If so check mine out fishingforstrains I would like to follow you also. Cheers!
abyss13
Well-Known Member
I used some good hash, US made,
for oil extraction using Everclear,
70% net oil yield (crumbled hash added to 45f ref temp let sit 4-5 hrs in fridge) strained in coffee filter & evaporated alcohol in Pyrex using a fan, window open. Very tasty & potent. Below is how I mixed & vaped iT, same as my Blk & Gold oils (Interesting enough the hash oil was more of a reddish color).
I like 2 diff kinds of oil Black and Gold. If u have int this is what I do:
1) Blk Oil: 1 oz herb to 20 oz everclear rm temp let it mix ~20 min, drain& strain into lg Pyrex, let it sit in sun (cover with cheese cloth)
for 20 min & alchemy occurs “green is gone”, makes 5.6 Gr Black oil, no I don’t Dewinterize...but u can if u want.
(NO HEAT used until down to 2 oz liquid in small 2x2 empty Pinzey spice jar
place on coffee warmer until All micro bubbles gone, stir with toothpic!) This oil works just fine mixed 5:2.5 ratio In C Cell cartimizer 2mm oil feed holes for vaping).
2) Gold Oil: Same as above, but use 5 lb of Dry Ice in a med size cooler
Prepare herb in glass jar & 20 oz Everclear in separate jar, when temp = minus -45f immediately mix the 2 &
shut cooler up...lightly shake cooler every 4 min., after 20 min done, drain & strain sitting in closed cooler.
Now just evaporate using fan blowing over cheese cloth cover Pyrex dish, finish off like above on coffee warmer. Yummy
I’ve tried a number of different solvents & emulsifiers(Puff Magic is my favorite did not like MCT oil & this is the way for me).
C Cell with 4-2 mm oil feed holes the way to go for vaping Amazon 2.50–3.5 ea 5 pacs usually.
Also 4 volt vape Pin 3 for $18 no ship fee Amazon... just takes some searching DH Gate for bulk buys.
( usually the 4 volt pins have 3 variable voltages & pre-heat, I don’t use preheat I think the 4 volt setting
just fine). I also use Puff Magic as a oil emulsifier, did not like MCT oil & terps r expensive.
I like 5:2.5 ratio
(Oil to Emulsifier)
I could go on & on, this is all new to me as well past year, just got tired of smoke in my lungs.
Teflon spatulas make best stir sticks & toothpic for stirring oil in Penzey Spice Jar (I save the jars when the wife is done using the spice). Absolute perfect size & thickness.
Put some oil on end of a safety pin & light iT as final check that all alcohol is evaporated u should not see any sizzle just melt...!
vapes well for me- about 45-55 hits per .5 mm cart. fill (1 oz herb will make enough oil for about 14 fills Blk oil, & 10 with gold oil or more if u want to lower the potency.)
As mentioned I use the 4 volt vape pin setting. Occasionally clean the draw tube with a pipe cleaner cut to 1 inch, appears these ceramic oil absorption takes in more than can handle-probably why I don’t use preheat function & draw soft !
Isn’t life grand, hope i didn’t bore u contact me any time.
for oil extraction using Everclear,
70% net oil yield (crumbled hash added to 45f ref temp let sit 4-5 hrs in fridge) strained in coffee filter & evaporated alcohol in Pyrex using a fan, window open. Very tasty & potent. Below is how I mixed & vaped iT, same as my Blk & Gold oils (Interesting enough the hash oil was more of a reddish color).
I like 2 diff kinds of oil Black and Gold. If u have int this is what I do:
1) Blk Oil: 1 oz herb to 20 oz everclear rm temp let it mix ~20 min, drain& strain into lg Pyrex, let it sit in sun (cover with cheese cloth)
for 20 min & alchemy occurs “green is gone”, makes 5.6 Gr Black oil, no I don’t Dewinterize...but u can if u want.
(NO HEAT used until down to 2 oz liquid in small 2x2 empty Pinzey spice jar
place on coffee warmer until All micro bubbles gone, stir with toothpic!) This oil works just fine mixed 5:2.5 ratio In C Cell cartimizer 2mm oil feed holes for vaping).
2) Gold Oil: Same as above, but use 5 lb of Dry Ice in a med size cooler
Prepare herb in glass jar & 20 oz Everclear in separate jar, when temp = minus -45f immediately mix the 2 &
shut cooler up...lightly shake cooler every 4 min., after 20 min done, drain & strain sitting in closed cooler.
Now just evaporate using fan blowing over cheese cloth cover Pyrex dish, finish off like above on coffee warmer. Yummy
I’ve tried a number of different solvents & emulsifiers(Puff Magic is my favorite did not like MCT oil & this is the way for me).
C Cell with 4-2 mm oil feed holes the way to go for vaping Amazon 2.50–3.5 ea 5 pacs usually.
Also 4 volt vape Pin 3 for $18 no ship fee Amazon... just takes some searching DH Gate for bulk buys.
( usually the 4 volt pins have 3 variable voltages & pre-heat, I don’t use preheat I think the 4 volt setting
just fine). I also use Puff Magic as a oil emulsifier, did not like MCT oil & terps r expensive.
I like 5:2.5 ratio
(Oil to Emulsifier)
I could go on & on, this is all new to me as well past year, just got tired of smoke in my lungs.
Teflon spatulas make best stir sticks & toothpic for stirring oil in Penzey Spice Jar (I save the jars when the wife is done using the spice). Absolute perfect size & thickness.
Put some oil on end of a safety pin & light iT as final check that all alcohol is evaporated u should not see any sizzle just melt...!
vapes well for me- about 45-55 hits per .5 mm cart. fill (1 oz herb will make enough oil for about 14 fills Blk oil, & 10 with gold oil or more if u want to lower the potency.)
As mentioned I use the 4 volt vape pin setting. Occasionally clean the draw tube with a pipe cleaner cut to 1 inch, appears these ceramic oil absorption takes in more than can handle-probably why I don’t use preheat function & draw soft !
Isn’t life grand, hope i didn’t bore u contact me any time.