...All Things Vero...

Would you consider buying a VERO after reading through some of the posts?

  • Total voters
    357
My first plants flowering under my DIY 500w Vero 18 with meanwell drivers. Unfortunately I had a lot going on in life at the time so they ended up vegging way to long and I got no low stress training in these pics were at week 6.
I just put 14 new clones into flower under my Veros, new ones I had lots of time for and they got low stress training, they are now nice short little bushes with each plant having 7-9 top colas. Last pic is my new round that just went in.
 

Attachments

  • IMG_20170405_175550.jpg
    IMG_20170405_175550.jpg
    4.5 MB · Views: 137
  • IMG_20170405_175451.jpg
    IMG_20170405_175451.jpg
    4.5 MB · Views: 129
  • IMG_20170405_175522.jpg
    IMG_20170405_175522.jpg
    2.9 MB · Views: 121
  • IMG_20170405_175516.jpg
    IMG_20170405_175516.jpg
    4.3 MB · Views: 128
  • IMG_20170502_210030.jpg
    IMG_20170502_210030.jpg
    3.2 MB · Views: 132
Last edited:
Nugachino said:
Pretty sure it will. I mean. It's the same amperage output as mine. And my lights work.

As long as you're covering the minimum voltages to operate your cobs you should be fine.
Click to expand...

I ordered 2 Vero29 Gen7 3000k, I would like to ask you but to connect them serves a specific connector?
 
ok im looking to build a light using these vero29 se i thinking of using
5x BXRC-35E10K0-C-73-SE <----less light more red
5x BXRC-40E10K0-C-73-SE <--- these seem to throw out more light but are more blue
if i use BXRC-35G10K0-C-73-SE lf i use these would this give me even more reds as they are 90cri

i did think of using the
4x BXRC-17E10K0-C-74-SE as its so red for extra red in flowering (is this he decor range ? as i was looking for the decor cri code thats aparenly 97cri but can seem to find it )
 
Anyone getting weird preflowers under LED's? I have been getting them with my 4k vero 29's since I started using them about 2 years ago.

Under HPS I was getting easily discernible preflowers one way or the other. Since I switched to LED's some males will show super fast while some plants will do this weird preflower thing where it looks like it could be both..

Cropped Preflower 2.jpg Cropped preflower.jpg

These types of preflower have been about 75/25 female for me. I have two different plants same type of thing happening. Pictures are of Biker Kush v2.0 from Karma Genetics.
 
IMG_0827.JPG IMG_0825.JPG

Here's Love Triangle By Bodhi. Same thing a little less drastic. These have been in flower for 4 days. But have been showing this type of preflower since about week 4 veg.
 
Nugachino said:
Pretty sure it will. I mean. It's the same amperage output as mine. And my lights work.

As long as you're covering the minimum voltages to operate your cobs you should be fine.
Click to expand...

I have 2x vero29 c SE leftover and I would like to run a similar setup. I thought about ordering 1x HLG-185H-C1400 (200.2W 1400mA71-143V)

That would run one chip with about 97watts. I would like to use an active cooling with
ARCTIC Alpine 64 PLUS, but I'm not sure if this fan would be powerful enough to cool nearly 100w?

Would it make sense to run them at 2.1A, or would it be inefficient? Are there any other cooling options from a source in europe?
 
Nugachino said:
Pretty sure it will. I mean. It's the same amperage output as mine. And my lights work.

As long as you're covering the minimum voltages to operate your cobs you should be fine.
Click to expand...

I have 2x vero29 c SE leftover and I would like to run a similar setup. I thought about ordering 1x HLG-185H-C1400 (200.2W 1400mA71-143V)

That would run one chip with about 97watts. I would like to use an active cooling with
ARCTIC Alpine 64 PLUS, but I'm not sure if this fan would be powerful enough to cool nearly 100w?

Would it make sense to run them at 2.1A, or would it be inefficient? Are there any other cooling options from a source in europe?
 
You must log in or register to reply here.
Back
Top