What's more important Ppfd or pounds? I pull over over 1.5 every 40 days with them. I really think you need to chill on the numbers for once and look at the reason why the numbers are important.Sure. 400ppfd for that space. Some Chinese panels match that.
Oh wow that's beautiful! I've already started ordering the parts for my DIY, but I was interested in ordering some of these xme chips to supplement my build.Have you checked out the Amare P3? Perfect for that space https://www.amaretechnology.com/product-page/f612e1c5-2458-ebed-37d5-7c6e9aa052fb
What do you think of these little kitsI hear the DIY'rs say its to much work & expensive. Might be able to get pre-made hard-strips. Thing is, bar isn't the ring. And there's a big difference.
Exactly what I was looking at. The owner is really helpful and they are based in California so shipping is somewhat fast. He has a huge selection of the smaller CREE lamps that Amare uses in these dolar pro features. I'm just curious if they are worth the extra hassleWhat do you think of these little kits
http://www.rapidled.com/12-led-plug-n-play-retrofit-kit-dimmable/
Cool! Looks good!What do you think of these little kits
http://www.rapidled.com/12-led-plug-n-play-retrofit-kit-dimmable/
I've done the PPFD. Far from 400. 680ish @ 3' w/ lenses in a 4.5'x4.5'. 2' w/o lenses is over 800.Sure. 400ppfd for that space. Some Chinese panels match that.
Sweet! Welcome to the Family!Well I pulled the trigger on a se450 for the flower tent. Victor is super cool. If you're looking for an amare light, email him and say you're from roll it up. He takes good care of you
I got the same results. I'm it 810 at 24". It's actually way to much for my plants. Recently turned off the monos to see if it helps.I've done the PPFD. Far from 400. 680ish @ 3' w/ lenses in a 4.5'x4.5'. 2' w/o lenses is over 800.
You just make dumb shit up as you go. Nobody should listen to anything you say, like ever.
If it's enclosed, lotta light. SE-250 is made for a 3'x3'.Is an se450 too much for a 3x3?
What's more important Ppfd or pounds? I pull over over 1.5 every 40 days with them. I really think you need to chill on the numbers for once and look at the reason why the numbers are important.
you mean make up dumb shit like lil smo is doing here,its the same ole shit with the amare crew lol.are they good,idk maybe but are they worth what they are asking,not imo.you can build 2 or more setups that match or beat these panels for what you pay for amare.honestly @Hybridway you are the only one i know of showing decent results with these lights and even then i think the suncloaks are making them look silly.its high time you took a white cob only panel and did a side by side,what ever happened to smo building you a cob light? fuck it dude with all that cabbage you toss around just buy someones fixture and run it,if its no good theres 30 guys here that will scoop it off ya.I've done the PPFD. Far from 400. 680ish @ 3' w/ lenses in a 4.5'x4.5'. 2' w/o lenses is over 800.
You just make dumb shit up as you go. Nobody should listen to anything you say, like ever.
Would a picture of a par meter above the canopy help? Lol your so stuck in your erector set half ass ziptie setup you forget the rest of the world.you mean make up dumb shit like lil smo is doing here,its the same ole shit with the amare crew lol.are they good,idk maybe but are they worth what they are asking,not imo.you can build 2 or more setups that match or beat these panels for what you pay for amare.honestly @Hybridway you are the only one i know of showing decent results with these lights and even then i think the suncloaks are making them look silly.its high time you took a white cob only panel and did a side by side,what ever happened to smo building you a cob light? fuck it dude with all that cabbage you toss around just buy someones fixture and run it,if its no good theres 30 guys here that will scoop it off ya.
I got the same results. I'm it 810 at 24". It's actually way to much for my plants. Recently turned off the monos to see if it helps.
I think the discrepancy could have something to do with reflectors being factory installed. I just measured a single cob at 12"- with reflectors 820 12" without reflectors 630 umoles. Not only at the single spot but all measurements in a 2' space were increased. This is the reason these stupid ass math equations and bullshit does not affect us like it does on paper. Decreased ppf with reflectors but 20% increased ppfd. The number that matters.
lol autoflowers, the jokes just keep getting better and better.Would a picture of a par meter above the canopy help? Lol your so stuck in your erector set half ass ziptie setup you forget the rest of the world.
All documented here big shot. 74 oz from 3 Amare. Perpetual setup with 75 day autoflowers. Every 40 days I pull new plants in. If you read the thread it's 1.62 gpw. Just because you haven't been to the thread your not wanted at doesn't make it a lie fucking clown. View attachment 3883948
Read back a few pages and you can also see the price comparison between Amare and the other companies and Amare was the least expensive per watt. But then again you all lose focus on the reason we grow and that's yield and quality of yield. Not how many watts you can get at what cost. As for the lights they are past manufacturing. Not an erector set like most diy'ers. For sale at 2 grow shops and online. In the past month alone I'm just under 100 units sold.
lol nice nutrient burn , awesome grow skills bro , very nice hemp plants. Bet those taste quality and have a great autoflower high (or lack thereof). Make sure you waste as many hours of light as possible as well , ya know to makeup for using less watts you can run it twice as long like auto's need.Yes garbage. That's why I grow it cause it's terrible. Show me where your plants are at day 75 from seed. Before you make any more foolish comments. A single photo I just chopped under 165watts - 3cobsView attachment 3884009