Bridgelux EB Series Build

PicklesRus

Well-Known Member
so samsung and bridgelux make 4 foot strips. Does anyone else make them? did i read this correctly, sumsung has 2 different lines of their 4 ft strips?
Not only do they have more than one series that use different leds on the M Samsung series (maybe the others too) they are available in different amounts of LEDs per foot.

Since I want lower output but better spread for seedlings I got the weakest ones in the M series.

If I was building something like @brahbbyB or a veg light i would get the strips with the highest density.
 

brahbbyB

Active Member
Alright just ran them for ~1.5 hours @ 900ma; definitely going to need a little bit of ventilation/cooling.
55C: Backside of LED #6 in center of fixture.
51C: Top of 1x1" aluminum rail on long side.
29C: Ambient Air (hanging ~2 feet below lights)
View attachment 3874204
Hooked up a 4" flexible exhaust and inline fan (~65CFM from HD) out the top of tent. I opened the bottom vent on the tent. Temps look like they lowered ~6 degrees. Air temp staying constant ~24C/75F.

tempswithexhaust.png
49C: Backside of LED #6 in center of fixture.
44C: Top of 1x1" aluminum rail on long side.
24C: Ambient Air (hanging ~2 feet below lights).
 

BuddyColas

Well-Known Member
Hooked up a 4" flexible exhaust and inline fan (~65CFM from HD) out the top of tent. I opened the bottom vent on the tent. Temps look like they lowered ~6 degrees. Air temp staying constant ~24C/75F.

View attachment 3877829
49C: Backside of LED #6 in center of fixture.
44C: Top of 1x1" aluminum rail on long side.
24C: Ambient Air (hanging ~2 feet below lights).
Keeping the backside of the heatsink (20 ga sheet) under 50C, canopy temps under lights about 75F, and over 800ppfd (36 cobs watts a square foot)...that ought to grow some serious weed!
 

Abiqua

Well-Known Member
does anyone else think the numbers on the samsung M-series spec sheet are kind of janky?

so running a M-series 4ft C
View attachment 3875206
HLG-320H-C1050B (im assuming this is the correct ma on the first column)
max v = 305
watts = 320.25

13.377 strips @ 426.73 watts

HLG-320H-C1400B
max v = 229
watts = 320.6

9.54 strips @ 320.6

HLG-320H-C2100B
max v = 152
watts = 319.2

4.30 strips @ 152 watts

These numbers don't seem to add up correctly.

View attachment 3875208
View attachment 3875209

HLG-320H-C1050B
max v = 305
watts = 320.25

6.73 strips @ 305 watts

HLG-320H-C1400B
max v = 229
watts = 320.6

4.92 strips @ 321 watts

the 1400 on the samsung seems to be right, the rest seem like someone just plugged numbers in there randomly. The bridelux numbers look right. I find the watts and volts on the 1000 ma bridgelux a little coincidental, but its at least close.

------
I actually just emailed Samsung on this, maybe ill hear back from them
move column to right and take last column and add it to the blank space ....shit is screwy kinda hafta guess that minimum current or do a little head math :peace:
 

Abiqua

Well-Known Member
I am wondering if they are too new quite yet....the reflector that is .....thanks @brahbbyB The ledils look goudah, but I wonder about mounting versus Zhaga mounts, have to try them out though!!!!......
eb mounting holes.png
 

brahbbyB

Active Member
Got around to soldering my Far Red XP-E's onto my sample PCB's. Been looking for an excuse to try out toaster oven soldering. Used the end of tube of tin-lead dispensable paste I was able to rescue from being tossed at work. Tested one of the 6up strings all the way up to the max 1000ma drawing right around ~15W.

solder.png toaster.png farredON.png
Plan on mounting these in the center 1/3 of the way from the edge and running for 5-10 minutes after lights off. I will hopefully have them mounted and wired tomorrow night.
 

muleface

Well-Known Member
i built built one of those out of a cheap ebay led spotlight i had. i just ordered and replaced the cob. but i am unclear as to how and when to use it.
 

Abiqua

Well-Known Member
Joined the team !! Makin some veg lights this weekend...

just a few....All 5k 560's.....I hope..... no markings mentioning such?

20170120_153457.jpg

Have some 1/8" channel for it
20170107_204055.jpg
 
Last edited:

Abiqua

Well-Known Member
Looks like they finally got the packaging down.
I will do a blog post or something. Digikey bless their hearts, are ferkin morans...seriously. And the only reason I bring this up, is because they decided to up my shipping 400%. The packaging was maybe worse than bending them....They were entirely loose in the biggest Anti static bag I have received to date :) and were just banging around each other or in piles. Wtf over, entirely defeats the purpose of the anti static bag.....I am thinking I got the 1st one in the morning, packaging job. Which had so much unneccesary stuffing i.e. weight, when it really is a lenghth penalty [my reason for the increased shipping AFTER using the "estimated shipping"]

They have always been my favorite and I have always had A+ service.....but this one had me on the phone....Im kinda pissed and entirely has nothing to do with Bridgelux....get your shot together Digikey for r3al. :peace:
 

PicklesRus

Well-Known Member
Hooked up a 4" flexible exhaust and inline fan (~65CFM from HD) out the top of tent. I opened the bottom vent on the tent. Temps look like they lowered ~6 degrees. Air temp staying constant ~24C/75F.

View attachment 3877829
49C: Backside of LED #6 in center of fixture.
44C: Top of 1x1" aluminum rail on long side.
24C: Ambient Air (hanging ~2 feet below lights).
What temp sensors are you using? Do you have a link?
 
Top