Am I close to harvest?

[ktmac20]

Lol...as much fun as it is growing...trimming is a real pain but ultimately worth it!

What is the temp and Rh% in your drying room?

One.suggestion I would make seeing as you are using drying racks is to shift your drying buds around for even drying and no flat spots. just once a day...

Good trim job too...

Cheers and Merry Christmas

 

[HandyGringo]

Lol...as much fun as it is growing...trimming is a real pain but ultimately worth it!

What is the temp and Rh% in your drying room?

One.suggestion I would make seeing as you are using drying racks is to shift your drying buds around for even drying and no flat spots. just once a day...

Good trim job too...

Cheers and Merry Christmas

I hope it is! And my drying tent is currently at 23c/73f and 47% humidity.

And thanks for the tip! I will.. And yeah I guess the trim is ok? I haven't done it before, and after trimming for 2 hours I started slacking a bit on the smaller buds.. I assume a bad trim on a tiny bud shows less.. Smaller leaves that curl in more.. I have no idea.. Just guessing, and hoping..

And right back at you pal

 

[ktmac20]

If you can...up that humidity to 60% and drying temp down to 70*...should take about 5 days at those ramps to get em to a nice curing dry stage...that is if you are planning to jar cure.

Are you planning on jar curing too? if so pay attention to not let your flowers get too dry...too quickly!

Yah your ttim.job looks.great...I wet trim pretty close and then finish trim before the jarring for cure!

Again...it all looks great!

 

[HandyGringo]

If you can...up that humidity to 60% and drying temp down to 70*...should take about 5 days at those ramps to get em to a nice curing dry stage...that is if you are planning to jar cure.

Are you planning on jar curing too? if so pay attention to not let your flowers get too dry...too quickly!

Yah your ttim.job looks.great...I wet trim pretty close and then finish trim before the jarring for cure!

Again...it all looks great!

I'll try! I got an inline fan and carbon filter running in there to avoid smelling up my building.. That should slowly lower the RH I hope.. And I'm planning a jar cure, but with boveda packs? I'm not entirely sure though.. I've considered it at least.

Also, do you have any estimate on my yield? After drying that is

 

[ktmac20]

"Bout a pound" lol sorry just had to! I really wouldn't venture a guess as to yield other than looks like you have PLENTY !

Uhmmm...can I humbly recommend to stay away from the boveda pacs especially during cure!

You buds have to cure at the proper rate by losing water and going through the actual chemical process of the cure.

Maybe bovedas will help for storage after the cure but not before!

Get a couple small hygrometers to track the Rh and.temp in your curing jars!

Here is my latest cure...

 

[ktmac20]

Also the "wet" buds themselves will raise the humidity too...especially in a smaller enclosed space...

Cheers

 

[AutoNorCal]

"Bout a pound" lol sorry just had to! I really wouldn't venture a guess as to yield other than looks like you have PLENTY !

Uhmmm...can I humbly recommend to stay away from the boveda pacs especially during cure!

You buds have to cure at the proper rate by losing water and going through the actual chemical process of the cure.

Maybe bovedas will help for storage after the cure but not before!

Get a couple small hygrometers to track the Rh and.temp in your curing jars!

Here is my latest cure...View attachment 3851974 View attachment 3851974 View attachment 3851977

Very pretty