EcoSunLite & 8-3590 run

[Hybridway]

Edited by me. No need to piont out the obvious.
Each vendor here should have documented grows by an unbiased RIU grower.

 

[Big smo]

No no no. Here's the bucket. See the chunk that's missing? I don't know how I even allowed myself to use it! New ones are ordered but won't be to home Depot for probably a week so this will have to do for now. I made a hole for the air stone in the top, but that's it. Also, the pieces I removed. I had to also change the 4 way supply, into a tee to bypass that bucket from being filled.
But as you can see, the runt and tang pow have swopped places for now. Hell, maybe I'll just leave it that way, even once it's fixed. Who knows. View attachment 3756857 View attachment 3756856 View attachment 3756860 View attachment 3756859 View attachment 3756858 View attachment 3756861

Best bet airwalker is buying one of those big ass tapered drill bits. There is almost no chance for error with them unless it's biggest size doesn't match what your desired size.

 

[Airwalker16]

Best bet airwalker is buying one of those big ass tapered drill bits. There is almost no chance for error with them unless it's biggest size doesn't match what your desired size.

That's what I used! A step bit

 

[Big smo]

That's what I used! A step bit

were you high?

 

[Airwalker16]

were you high?

I dont think the chunk was out of it. I think moving it around caused it to finally break away and leak. Can't wait for the new buckets to get to home depot.

 

[Big smo]

Would blue ones from lowes work?

 

[Airwalker16]

Would blue ones from lowes work?

That's what I'm using for temporary right now in its place. But they let light in, aren't the same lid size(wont snap down), and the bucket itself just isn't the same shape. I want to use the buckets the rest are made out of.

 

[HydroRed]

Dont wait on buckets bro, just step up to next size hole and put a bigger grommet and adjust the T or fitting accordingly. Maybe what a $4 fix til the buckets do show up?

 

[Airwalker16]

Dont wait on buckets bro, just step up to next size hole and put a bigger grommet and adjust the T or fitting accordingly. Maybe what a $4 fix til the buckets do show up?

It's really not a huge deal. The buckets full of nute water being bubbled by an air stone. It's just a regular dwc on that one site right now for a few days. Ain't no thang.

 

[Airwalker16]

Dont wait on buckets bro, just step up to next size hole and put a bigger grommet and adjust the T or fitting accordingly. Maybe what a $4 fix til the buckets do show up?

That'd be just more money and time put in to it as well, unfortunately. I'd have to go order on amazon, 1-1/4" grommets, and buy a 1"x1"x1-1/4" tee to be able to connect everything, and I dont even know if they sell those. Using 1-1/4" to 1" reducer couplings in place of that tee would just mean buying AND cutting new tubing for the extra pieces and really just seems more a hassle than just waiting on a bucket to drill 2 holes in to.

 

[frica]

Who knows. View attachment 3756857

It's the blurple man.
It ate away part of the hole.

White cobs have phosphor to keep the demons trapped but that's not the case with red and blue.
I still see those demons flying around my room sometimes.
Always tormenting me and cutting bigger holes in stuff.

 

[Ecosunlite CREE LED]

Start rounding up the active Amare growers since your always trying to cut them up. I bet my new pro4 which is only 3 cobs would beat any light Eco sells. Only issue I have im not taking down a good performing light for an Eco to test or another companies benefit. I also don't own a minisplit and I think it's going to be needed.

That will be impossible , if you use our Unit cx cob model , and you will know whether your new Pro 4 can beat our unit .
You don't grow with our CX COB Model , how do you know your Pro4 is better or not ?

 

[sixstring2112]

That will be impossible , if you use our Unit cx cob model , and you will know whether your new Pro 4 can beat our unit .
You don't grow with our CX COB Model , how do you know your Pro4 is better or not ?

what is your best light with cobs in it ? i had a look at your site but its a lil tough to navigate

 

[Airwalker16]

what is your best light with cobs in it ? i had a look at your site but its a lil tough to navigate

Probably they're 6 cob, 9 pcb one

 

[Ecosunlite CREE LED]

what is your best light with cobs in it ? i had a look at your site but its a lil tough to navigate

Our best LED with COB in it is CX COB 4 LED , 5W CREE XTE All white model .

 

[Ecosunlite CREE LED]

Probably they're 6 cob, 9 pcb one

That one is the most coverage one .

 

[Airwalker16]

Our best LED with COB in it is CX COB 4 LED , 5W CREE XTE All white model .

How? You have a light like the one I received, but with 3 extra cobs and 3 extra PCBs. That's 6 cobs. Why do you say the 4 cob is better?

 

[Ecosunlite CREE LED]

How? You have a light like the one I received, but with 3 extra cobs and 3 extra PCBs. That's 6 cobs. Why do you say the 4 cob is better?

4 cob mix with 8 clusters which with 5W CREE XTE , powerful one .

 

[Airwalker16]

4 cob mix with 8 clusters which with 5W CREE XTE , powerful one .

So how is 4 cobs and 8 clusters more powerful than 6 cobs and 9 clusters? Driven harder and using 5w xpes rather than 3w?

 

[Airwalker16]

I wish I would have won that esl4 cob though. It would have fit so much more perfect in the middle of my diy and given me more xpe lighting. Or the 6 cob. That'd been even cooler.