Anybody make wax?

qwizoking

Well-Known Member
wtf who still pays 60 an 1/8
thats like early 2000's high school prices

i get 25 an 1/8 in tx
or 10 a g, 2 for 15

cray
 

bgmike8

Well-Known Member
wtf who still pays 60 an 1/8
thats like early 2000's high school prices

i get 25 an 1/8 in tx
or 10 a g, 2 for 15

cray
You're generally gonna pay 50.

This is all new to me. I used to sell Mexican brick. 800 a pound. Didn't sell oz but they would be 80. 100

However I did get 6 oz for 200 a piece a while back and I sold them between 250 and 280.
 

doniawon

Well-Known Member
I make wax if I got 60 a g, ud b talkin to a millionaire20160706_130312.jpg20160518_180156.jpg
I get 22 n its hard gettin the extra 2. But grnerally goes for 30
 

doniawon

Well-Known Member
It sucks.
But u blast n tubes w butane.
Purge it (in pyrex dish)with boiling water bath, or sunlight
Collect it with razor.
Vac it at 110º
For hours 2-10
Place back n dish melt n whip til its wax n zero stickyness
 

qwizoking

Well-Known Member
You're generally gonna pay 50.

This is all new to me. I used to sell Mexican brick. 800 a pound. Didn't sell oz but they would be 80. 100

However I did get 6 oz for 200 a piece a while back and I sold them between 250 and 280.


you should move.
ive been all over the u.s, never seen legit prices like that. is always more in college towns ot atleast around the university..same witj expensive cities the farther north you go. like nyc ive seen bricks go for 7-8 decent quality..
but i mean ibe seen the same bricks here go for 350

anyway there are lots of threads about prices..

look. most dank yields roughly 20% meaning 5gs per gram of oil. of course you might get 28 or 15% depending method as well.,
ideally you buy in bulk so its cheaper. 5gs of dank sounds like it could cost you 80 bucks, that seriously sucks bro..
 

qwizoking

Well-Known Member
it sounds like your end goal is monetary gains..
buy a brick of mex weed and blast that, winterize..
youll still get a +10% retirn if its decent and alot cheaper gram for gram of resulting oil.
meaning sell cheaper, still profit and expand

but that's how ive always done it..
i sell dank homegrown for 50-100 a zip cuties all day for 2 bills..
 

davethepothead

Well-Known Member
15-20 a gram.
50-60 an 1/8th.
250-350 an oz.
60 a gram for bho.

Imo, yields from making bho aren't worth trying to profit unless you can get your starting product cheap. If your prices are as high as mine I would guess people don't come across extracts too often. So they will have a high expectation of quality because they've either smoked some from a medi/legal state or they see/hear about it through media. So with that being said DONT USE MEXI/BRICK/REGGIE/TRASH WEED! your end product can only be as good as the beginning. Don't get me wrong, you can make it with low quality but people will be "meh, it was ok" about it and not keep coming back. So find you some quality trim/shake, if you can't find that then find someone who will cut you a deal on cheap oz's. I knew a ghetto dealer who had some nice buds, I bought an oz and made bho that night to try my hand at it, called up some peeps and sold it all in 2 days. I went back to the dealer to get another oz and a sample of the bho. I showed him there was demand for it and started producing for him. All I had to do was make it and bring it back to him, I got paid before he sold it because he knew it would sell like crack. Just learn learn learn how to make it (use the internet you will find all the info u need, I recommend YouTube) and keep trying, as you go along you'll improve and your producT will get better and better.
 

qwizoking

Well-Known Member
So they will have a high expectation of qualitybecause they've either smoked some from a medi/legal state or they see/hear about it through media. So with that being said DONT USE MEXI/BRICK/REGGIE/TRASH WEED! your end product can only be as good as the beginning.



wrong....

made hash oil for a good decade off reggie... its as good as you make it

https://www.rollitup.org/attachments/img_20140513_113537_376-jpg.3166350/

^ precipitated hash..

apply the same techniques using your nogin a bit and yiu can get something beautiful..ive posted los of hash pics nobody would.know the dif
now most people cant do that but..my point remains

even if your a beginner, as i said, winterize and youll get a great shatter that sells. its not hard to do
 

bgmike8

Well-Known Member
Good info.

I think I was misunderstood. I don't fuck with Mexican anymore. 2007 was the end of that. Nobody wants that shit anymore anyway.
When I did it was 550 a piece for 20 of em. I sold em for 800 to my guys.

But a few prison bits later here I am.
I don't have much experience with good quality dope.
But it def is 50 an eighth. Sometimes 60.

Oz is in the 250 to 280 range. Qp 950 to 1000.

So I'm going to harvest soon and I'm just trying to figure out the best way to commercialize my trim.

I've got a kid telling me high quality hash goes for 35 to 40 a g.
I've seen people paying 20 for a Gummi .
So I'm thinking edibles would be a decent market.
However people are going nuts about this dab shit. A little dab sends me into a fucking panic attack. Lol

It seems that making wax is a pain in the ass. Especially if I can move some edibles from bubblehash. ....
I don't even know how much I'll have from my trim..
 

GuyLeDuche

Well-Known Member
So I'm thinking edibles would be a decent market.
IMO edibles are one of the best for return on investment, you can use anything to make the oil since terps don't need to be preserved and the cost per mg is ludicrous. Generally I see 10mg/$5 or 100mg/$20 type prices for candies. Very touristy, casual customer target though I think, I would need to eat a $100 bill worth to get a good strong high at a retail shop lol.

I think a lot of guys do multiple passes on the same herb and use the first run for dabbing oil and 2nd, 3rd, etc for edibles...

I find with some 25 and 15 micron ss screen I get clear shatter from trim with a simple QWISO method... Large scale the first issue would be evap, I find starting (and ending) with as thin a layer as possible is crucial..

Edit: here's a quick snap of some I collected this Am just for fun ;)

DSCN4649.JPG
 
Last edited:

doniawon

Well-Known Member
So many ways everybody has to tackle the learning curve.
In 3 years of making it I have fucked up lbs of trim damn neard burned a house down blew filters n ruined runs etc..
U can get a closed loop and a vac oven it'd be way safer n easier..but good luck on getting them for under 2k
 

qwizoking

Well-Known Member
read through the threads in the concentrate section...
look fr twitch and guzias1


all use homeade stuffs..

and learn along the way, also making some of the better looking product youll see

again winterize-purge.. clean up the hash plus no need for vac..cheap

personally bho isnt my favorite method but i dont really push mine that hard, it can be simple and easy

just do some reading...thats why its there, just like when yu learn to grow
 
Top