Jerry @ KingBrite to release Pin Heatsinks, Silicone Lenses, HLG320's,and new Angelinas.

[Airwalker16]

If you've ordered from Jerry before, I'm sure you recently got the email.
I'm so stolked!

 

[BOBBY_G]

sounds like he's getting lapped by cutter and is in shock over it.

 

[Airwalker16]

I agree but his are all pre drilled as well and come in 7 different sizes :/
130-140-150-150-160-170-180mm. All black anodized.
The angelina problem I personally ran into is being fixed, and the fact that he's got 320's and silicone lenses in Stock is huge imo.

 

[BOBBY_G]

nice to see hs on the larger end

 

[anomolies]

What angelina problem? What do these silicone lenses look like btw , any pics?

 

[IFARTED]

Good stuff I like the pin sinks

 

[Airwalker16]

 

[JorgeGonzales]

What angelina problem? What do these silicone lenses look like btw , any pics?

Angelina ripoff problem, not Angelina.

 

[JorgeGonzales]

Are those fan mounting holes on the heatsinks?

 

[Airwalker16]

Are those fan mounting holes on the heatsinks?

Sure looks like it! Something nobody else has to offer!!

 

[nevergoodenuf]

Those holes are for the driver bracket. My heat sinks have that same holes.

 

[optzulu]

Good stuff love the 320h-1050,
Does he have the 700ma ?

 

[anomolies]

Angelina ripoff problem, not Angelina.

Ok so we got angelina ripoffs from cutter?

 

[BOBBY_G]

cutter sells genuine ledil angelina, theyre a few bucks as opposed to jerrys 88 cent knockoffs

 

[anomolies]

Mine have the same problem as OP though. Its an angelina problem then? Lol back to where we started

 

[BOBBY_G]

Those holes are for the driver bracket. My heat sinks have that same holes.

where'd ya get em?

 

[Greengenes707]

They usually aren't threaded from base/china suppliers. And most of the time won't be used or useful in application. Doesn't change the performance in any way unless you use them to mount a driver like a hbg and limit air flow while also adding heat. HBG's are better for a radial with a chunky center that doesn't get air flow regardless or driver or not than pins.

Anyways....that is what the holes are/for.

 

[Airwalker16]

I guess if a fan were to fit though... That'd be pretty Frickin nifty.

 

[nevergoodenuf]

It might be the HBG mount like Greengenes said, but 2 different heatsinks I have both have a similar pattern.

 

[ThaiBaby1]

I agree but his are all pre drilled as well and come in 7 different sizes :/
130-140-150-150-160-170-180mm. All black anodized.
The angelina problem I personally ran into is being fixed, and the fact that he's got 320's and silicone lenses in Stock is huge imo.

So what are the prices?