Struggling with cloning - need 30-60 per month

Beezcheeze

Beezcheeze

Well-Known Member
right now I have several mothers going and need to get my clone area finished asap.

Have had a lot of trouble cloning in the past using several methods.
This time am thinking a large bubble cloner, or just root plugs with no dome.
My grow area is 2x4x6' tall and need to build or setup a container to hold 60+ clones.

Any suggestions for a simple low maintenence DIY build? Thanks!
 
B

BlackD.O.G

Active Member
ThaMagnificent said:
How long should i leave the dome on the turbo cloner?
Click to expand...

You dont need it but it speeds rooting by slowing transpiration through the leaves. Remove the dome at first signs of roots. Good luck. Also a little trick, if your limited to say 48 sites you can always double up on each site with great success. Just be sure to separate them when they have small roots so they dont become tangled up.
 
dbkick

dbkick

Well-Known Member
BlackD.O.G said:
You dont need it but it speeds rooting by slowing transpiration through the leaves. Remove the dome at first signs of roots. Good luck. Also a little trick, if your limited to say 48 sites you can always double up on each site with great success. Just be sure to separate them when they have small roots so they dont become tangled up.
Click to expand...
Then you should be using Clone guard or anti wilt, stops transpiration dead.
 
B

BlackD.O.G

Active Member
dbkick said:
Then you should be using Clone guard or anti wilt, stops transpiration dead.
Click to expand...
Well it doesnt cost much for a dome and it will last a lifetime compared to buying more products you dont need. With a turbo klone you can root clones in 4 days.
 
dbkick

dbkick

Well-Known Member
True shit though, Flying Skull clone guard or vitagrow anti wilt and toss your humidity dome.
 
WeedFreak78

WeedFreak78

Well-Known Member
Beezcheeze said:
right now I have several mothers going and need to get my clone area finished asap.

Have had a lot of trouble cloning in the past using several methods.
This time am thinking a large bubble cloner, or just root plugs with no dome.
My grow area is 2x4x6' tall and need to build or setup a container to hold 60+ clones.

Any suggestions for a simple low maintenence DIY build? Thanks!
Click to expand...
Your whole area is that size or just the cloning area? The tote aero cloner I built holds 34 cuts. 2 would get you 68, so a few extras. I used these plans
https://www.rollitup.org/t/harvest-a-pound-every-three-weeks.116859/#post-1420612
Get the black totes with yellow lids, I got mine at Lowes. There's 2 types I found one the "squares" on the lid are diamonds, don't get that, won't work as well.

See how one is a straight grid, one is cross cross? Find the straight grid.
 
Last edited:
You must log in or register to reply here.
Top