Rosin Tech

XRE

Member
all the straighteners have ceramic plates. I've wondered how steel plates would do... when those sic plates come out ..... I haven't seen a steel nail either. Steel doesn't tarnish like silver does. I wonder why no ones made them. Steel is cheaper $$$ than titanium too.
What straighteners have ceramic plates? I've been collecting them for awhile now to steal the plates and heating elements, and every single one (from cheap ones to high end ones with screens) all have (what appear to be extruded) aluminum plates.

Aluminum is better at evenly spreading the heat around which is probably why it's used over steel. And as the previous poster mentioned steel would be horrible for a nail. Although I do find it interesting that people don't seem to mind the vape pens which use Kanthal wire, being made mostly of iron.
 

hyroot

Well-Known Member
What straighteners have ceramic plates? I've been collecting them for awhile now to steal the plates and heating elements, and every single one (from cheap ones to high end ones with screens) all have (what appear to be extruded) aluminum plates.

Aluminum is better at evenly spreading the heat around which is probably why it's used over steel. And as the previous poster mentioned steel would be horrible for a nail. Although I do find it interesting that people don't seem to mind the vape pens which use Kanthal wire, being made mostly of iron.

all the Remington ones have either ceramic or ceramic pearl infused plates Your straighteners must be very old.
 

Twitch

Well-Known Member
so I broke the press... not sure how but thank god for HF it was missing parts and they still took it back.. I wanted to keep the plates

I consistently go .3 off of 1 gram of dry sift. what about yall?
 

hyroot

Well-Known Member
so I broke the press... not sure how but thank god for HF it was missing parts and they still took it back.. I wanted to keep the plates

I consistently go .3 off of 1 gram of dry sift. what about yall?

I usually get a 50% return from sift.got 80% one time with 9lb hammer flowers to sift.

did you cure your material for a while. I found the longer the cure the better the yield. Even with flower rosin.
 

hyroot

Well-Known Member
so you generally get 50% on your sift. one press or 2 or 3

yeah 2 presses. Some times 3. I only get something on the 3rd press half the time.

as soon as my bubble finishes drying I will try pressing with a 90µ screen. See if that increases yield or change in quality. Everyone that uses regular tea bags (iced tea) gets an 80% return almost every time.
 

Yodaweed

Well-Known Member
Teabag tech is where its at I cut my blotting screen up from my bubble bags and sewed it together so I got a 25micron teabag that I press with my Remington hair straightener(it has aluminum plates hyroot :P) I saw some people use a hot t-shirt press or a pneumonic press I been looking into purchasing a good press but with no youtube videos of anyone ever using a hydraulic press I have been hesitant to make a purchase.
 

hyroot

Well-Known Member
Teabag tech is where its at I cut my blotting screen up from my bubble bags and sewed it together so I got a 25micron teabag that I press with my Remington hair straightener(it has aluminum plates hyroot :P) I saw some people use a hot t-shirt press or a pneumonic press I been looking into purchasing a good press but with no youtube videos of anyone ever using a hydraulic press I have been hesitant to make a purchase.

make sure ro use either nylon or kevlar thread.

nylon - 485°
kevlar - 800°

my Remington has ceramic plates. Its practically brand new...

ceramic can be polished to look almost like aluminum. But aluminum would burn hair. They don't make them with straight aluminum. If they use aluminum. They coat them with ceramic. The coated ones are lower quality. They crack and break.

aluminum has a lower melting point too.
 
Last edited:

Yodaweed

Well-Known Member
make sure ro use either nylon or kevlar thread.

nylon - 485°
kevlar - 800°

my Remington has ceramic plates. Its practically brand new...

ceramic can be polished to look almost like aluminum. But aluminum would burn hair. They don't make them with straight aluminum. If they use aluminum. They coat them with ceramic. The coated ones are lower quality. They crack and break.

aluminum has a lower melting point too.
You are actually right, its a polished ceramic that looks silver here's the description off remingtons website

No blow-dryer needed to create long lasting shiny results in less time guaranteed! These unique vents and channels allow this flat iron to be used on wet or dry hair. The channels extract moisture from damp hair and allow the steam to escape through the vents, drying hair and sealing the cuticle at the same time.
  • Unique steam vents; for use on wet or dry hair.
  • 2” wide ceramic & tourmaline plates; high, even heat and less frizz.
  • Dual ceramic heaters; high heat for maximum styling power.
  • Ultra-smooth ceramic and tourmaline plates for even heat distribution and a healthy shine.
  • 30 heat settings; for all hair types.
  • 30 second heat up time; ready when you are!
  • Automatic safety shut-off; turns the unit off after one hour.
  • Digital LCD display.
  • Audible ready indicator; lets you know when your straightener is ready.
  • 2 year warranty.
 
Top