majins
Well-Known Member
Sorry for thread high jacking but, Whats the normal wattage from the wall each 3070 should be pulling.
So far gotten 1 put together and is only pulling 25-35W where I was expecting 45-55W since its running 34V at 1.75A
T junction temp 30C.
Thermal compound spread using the dot method then sliding cob around to spread it out and remove any air.
Then used some high temp glue on the 2 corners to insure it doesnt slip off.
Has active cooling but hasnt even needed to turn on since temps are a lot less then I was expecting.
So far gotten 1 put together and is only pulling 25-35W where I was expecting 45-55W since its running 34V at 1.75A
T junction temp 30C.
Thermal compound spread using the dot method then sliding cob around to spread it out and remove any air.
Then used some high temp glue on the 2 corners to insure it doesnt slip off.
![](/proxy.php?image=http%3A%2F%2Fs22.postimg.org%2Fbs472jywx%2FIMG_1434.jpg&hash=48e1a7ede4d9b0bc7f2b9dc8916440ec)
Has active cooling but hasnt even needed to turn on since temps are a lot less then I was expecting.
![](/proxy.php?image=http%3A%2F%2Fs22.postimg.org%2F8mjlccgap%2FIMG_1435.jpg&hash=a0c2557a79d55cf0c04e37ccb936d5b6)