bodhi seeds

TheHermit

Well-Known Member
Is goji hard to clone? I have a male goji that I have been holding onto, but was wanting to take some clones for chucking and to replace the male plant which is getting too big. I am about to make my fourth attempt at cloning, but I have had no luck so far. I have had no problems with other strains.
 

DoctorFrost

Well-Known Member
I have had some strains be much harder to clone then others, and then some that basically clone themselves. Something I am going to try next time I read on here is to put the cutting in a cup of water, away from the light, and change the water out everyday and it's supposed to work well. When you clone, you don't want very much light at all. Put a single 26watt CFL there and put them way off to the side somewhere not under the light. They need to put there energy to rooting instead of growing.

I can't promise you this will work, but I am about to try it here soon and it came from a reputable source.

If you put directly into soil make sure to have some sort of plastic around them, I used to use plastic drawers out of a refrigerator and put them overtop the clones and mist water on the plants and inside as much as possible. Sometimes I have put plastic baggies over top the plants and cut a couple small holes in them and spray inside the baggie with a mister as much as possible.
 

TheHermit

Well-Known Member
I am using an aerocloner, but the stems turn to mush after a few days. I don't think it is a water quality issue, because my other clones look fine. I am wondering if it has some sort of disease, or if it just happens to be a plant that does not like to be cloned.
 

akhiymjames

Well-Known Member
I have had some strains be much harder to clone then others, and then some that basically clone themselves. Something I am going to try next time I read on here is to put the cutting in a cup of water, away from the light, and change the water out everyday and it's supposed to work well. When you clone, you don't want very much light at all. Put a single 26watt CFL there and put them way off to the side somewhere not under the light. They need to put there energy to rooting instead of growing.

I can't promise you this will work, but I am about to try it here soon and it came from a reputable source.

If you put directly into soil make sure to have some sort of plastic around them, I used to use plastic drawers out of a refrigerator and put them overtop the clones and mist water on the plants and inside as much as possible. Sometimes I have put plastic baggies over top the plants and cut a couple small holes in them and spray inside the baggie with a mister as much as possible.
I can attest to cloning in a cup of water. That's my usual method and it works well. The process is the same as cloning with rockwool or rapid rooters low light levels and change water out and they root usually within 2-3 weeks. My Platinum Delights is pretty quick between 7-10. I like this method but it's slow now that I have plenty space to run plants so I'll be making a cloner to speed things up a bit and keep my month perpetual cycle going
 

DoctorFrost

Well-Known Member
I guess I need to build myself a cloner. I am thinking about switching up how I do things. Instead of vegging my plants out long enough to see sex, I am considering vegging them long enough to take a clone from then after that clone roots flip it to 14/10 and trying to get it to show its sex asap. It just seems to take forever to show sex sometimes and I hate taking up the room. These SSDD I have now have been vegging for a long time, I just wish they would show already so I could up plant them into their final homes. I hate to put them in 15 gallon smart pots when I have to cut half of them. I know I could reuse the soil but it is still a pain, and takes up a lot of room in my limited veg space.
 
Check out the grow or grows of it over at the Bay, Looks to be stretchy as hell but really pretty and frosty.
I used to have a different account but I forgot the info :X I usually just read but I figured I would ask really quick...

What are Bodhi's best strains for weight plus quality?

This thread is crazy long so I figured I would just ask. Sorry for being somewhat lazy.

Most of you guys seem very well versed on his strains and I was gonna grab 2 or 3 here soon so I would REALLY APPRECIATE the input :)

Thanks boys!
 

akhiymjames

Well-Known Member
I used to have a different account but I forgot the info :X I usually just read but I figured I would ask really quick...

What are Bodhi's best strains for weight plus quality?

This thread is crazy long so I figured I would just ask. Sorry for being somewhat lazy.

Most of you guys seem very well versed on his strains and I was gonna grab 2 or 3 here soon so I would REALLY APPRECIATE the input :)

Thanks boys!
Don't know if his strains are geared to be monster yielders. I know most of them have average yields but you know there are some that will yield crazy good but his strains are top quality. I know @genuity got the Mothers Milk going now and that's gonna be a big yielder. I'm sure it's quality there as the mom of Mothers Milk is the same moms of Goji so that would be one to look into

Oh the new Blueberry Hashplant cross is nice yielder too. I think @bigworm6969 grew that one and killed it
 
Don't know if his strains are geared to be monster yielders. I know most of them have average yields but you know there are some that will yield crazy good but his strains are top quality. I know @genuity got the Mothers Milk going now and that's gonna be a big yielder. I'm sure it's quality there as the mom of Mothers Milk is the same moms of Goji so that would be one to look into
Understandable but which do the best in you guys opinion?

I was looking at... Dream Breaver, Golden Triangle... Pura Vida...

Any input welcome. Thanks!
 

akhiymjames

Well-Known Member
Understandable but which do the best in you guys opinion?

I was looking at... Dream Breaver, Golden Triangle... Pura Vida...

Any input welcome. Thanks!
Bodhi has too many high quality crosses to try a pick one out as the very best of them all. People who love and grow Bodhi have grown many strains and will continue cus his gear is that good. Any of those would be good I guess it depends on what interests you the most

Go look in the Popular Bodhi Strains thread Genuity posted a pic of his current run with Mothers Milk. You will love the pics!!!
 

st0wandgrow

Well-Known Member
I used to have a different account but I forgot the info :X I usually just read but I figured I would ask really quick...

What are Bodhi's best strains for weight plus quality?

This thread is crazy long so I figured I would just ask. Sorry for being somewhat lazy.

Most of you guys seem very well versed on his strains and I was gonna grab 2 or 3 here soon so I would REALLY APPRECIATE the input :)

Thanks boys!
None of the ones I have grown have been bad in the yield department. Dream Lotus is a HUGE yielder though. I would imagine any Blue Dream cross (Blueberry Hashplant) would be good. The Gogi pheno I kept gives up a nice yield too.
 

natro.hydro

Well-Known Member
My list so far is:

Gogi OG
Dream Lotus
Silver Mountain
Dream Beaver
Golden Triangle
Pura Vida
Mothers Milk (Out of Stock everywhere tho)
My golden triangle yeilded the best of the 3 strains I grew. Wasnt huge but given another run I think I could have dialed it in more, but I didint take a clone becaise I was convince the gt was a boy.
 

Amos Otis

Well-Known Member
Understandable but which do the best in you guys opinion?

I was looking at... Dream Breaver, Golden Triangle... Pura Vida...

Any input welcome. Thanks!
Can't think of any Bodhi that didn't yield at least avg, but I had 2 above avg and one huge yielding Blood Orange. Maybe the largest yielder of last year. The smoke wasn't for me, but some cats have said they liked it quite a bit. Blueberry Hill, same thing.
 

akhiymjames

Well-Known Member
would any chem crosses he did be a large yielder?


I seem to remember reading that chem was a pretty big yielder and the only chem cross plant I ever grow had some nice big flowers on it.
Front the way the plants is looking I see some nice yielders in the Chem 3 x 88g13/hp. Two of the 5 females are bigger than the others and looks like they will be beefy. The way the nodes are watching on top of each other I would think so plus I believe the 88g13/hp dad is a beast and adds yield.
 
Top