Whats quickest way to make hash ..?

[Gquebed]

Wow. You truly are a moron.

 

[D_Urbmon]

LOL

 

[lio lacidem]

Bottom line....

I would rather suffer a higher percentage of contamination in my hash than give up over 30-40% of yield chasing a 20% higher purity.

It is such a waste...particularly when NOBODY can taste the difference in that purity.

Actually all you gotta do Is go on analytical 360 and look up test results in dry ice hash and then flower rosin you will see the best dry ice hash tested at 32% total cannabinoid s the two rosins tested were both in high 70s. I gotta agree dry ice is a very dirty low end extract.

 

[Gquebed]

Actually all you gotta do Is go on analytical 360 and look up test results in dry ice hash and then flower rosin you will see the best dry ice hash tested at 32% total cannabinoid s the two rosins tested were both in high 70s. I gotta agree dry ice is a very dirty low end extract.

Like i said... i have not argued that rosin is not purer. Read my posts. My argument is that rosin wastes a lot and is far feom being pure. And the taste difference in purity between the two is not large enough for ANY HUMAN to discern. Fact. In a blind taste test you would not know which is which.

 

[lio lacidem]

Your nuts you would taste plant matter and chlorophyl in the dry ice and terps and flavor in the rosin. Also it is a big difference between 30% and 70% thats like comparing great flower to a good. Concentrate you would definately know the difference.

 

[lio lacidem]

Also im not yet sold on being able to use rosin in commercial terms so I am looking for flaws in the rosin tek but your arguement is incorrect.

 

[Gquebed]

Your nuts you would taste plant matter and chlorophyl in the dry ice and terps and flavor in the rosin. Also it is a big difference between 30% and 70% thats like comparing great flower to a good. Concentrate you would definately know the difference.

Hahahahahahhaah.... 30% to 70% is a canabinoid measurement ....not a purity...meaning plant matter etc.... nobody here even knows the difference...

Cannbinoid content is not a measurement of purity...it is a measurement of cannabinoid...

 

[hyroot]

I made rosin last night from a 4 month cured 45u ice wax. Made just a few dabs as a test. You may lose yield. 2 dabs and I was high for hours. I have a very high tolerance. You really don't need that much. It tastes so much better than the ice wax.

rosin is commercially produced already. Its already in the dispensaries at $100 a gram.

people have even modified presses to make a bunch with one press.

 

[D_Urbmon]

Hahahahahahhaah.... 30% to 70% is a canabinoid measurement ....not a purity...meaning plant matter etc.... nobody here even knows the difference...

Cannbinoid content is not a measurement of purity...it is a measurement of cannabinoid...

You Sir, are HILLARIOUS!

 

[lio lacidem]

[QUOTE="hyroot, post: 11459136, member: 319672"I made rosin last night from a 4 month cured 45u ice wax. Made just a few dabs as a test. You may lose yield. 2 dabs and I was high for hours. I have a very high tolerance. You really don't need that much. It tastes so much better than the ice wax.

rosin is commercially produced already. Its already in the dispensaries at $100 a gram.

people have even modified presses to make a bunch with one press.[/QUOTE]
Havent seen it in any dispensaries ive been too but I admit I mostly make my own medicine. id like to see it available just a pain in ass to make a decent amount with only hair straightner. I value your hash opinion so whats your thoughts on contaminate in dry ice hash?

 

[BDOGKush]

I have a couple jars full of dry ice kief, its quick and easy but VERY low grade when compared to other concentrates. Especially when done with a 220 bag like Gque shows in his dry ice thread.

 

[hyroot]

[QUOTE="hyroot, post: 11459136, member: 319672"I made rosin last night from a 4 month cured 45u ice wax. Made just a few dabs as a test. You may lose yield. 2 dabs and I was high for hours. I have a very high tolerance. You really don't need that much. It tastes so much better than the ice wax.

rosin is commercially produced already. Its already in the dispensaries at $100 a gram.

people have even modified presses to make a bunch with one press.
Havent seen it in any dispensaries ive been too but I admit I mostly make my own medicine. id like to see it available just a pain in ass to make a decent amount with only hair straightner. I value your hash opinion so whats your thoughts on contaminate in dry ice hash?

dry ice hash is crap. Its full of visible plant material and the same micro plant material that ends up in the 25µ bubble bags.

If I were to make dry ice hash. I would also run it through dry sift screens to clean it. Sort of seems counterproductive to do the dry ice method at that point. Might as well do dry sift from the beginning.

I've made rosin with dry sift and microplaned bubble. They were both really good.

 

[Gquebed]

I dont understand how this thread got jacked to become one about rosin?

The op asked which is the quickest way to make hash. The only answer is dry ice. It is the quickest and easiest and the least messy. Period.

Ask anyone who has done both.

If rosin is so pure then it has no business being mentioned in this thread, which is about "hash."

this HTML class. Value is http://i.word.com/id

 

[hyroot]

I dont understand how this thread got jacked to become one about rosin?

The op asked which is the quickest way to make hash. The only answer is dry ice. It is the quickest and easiest and the least messy. Period.

Ask anyone who has done both.

If rosin is so pure then it has no business being mentioned in this thread, which is about "hash."

this HTML class. Value is http://i.word.com/id

technically dri ice kief isnt hash either, so that doesn't belong in this thread either by your standards. To actually make hash takes months. Hash takes 2 days of processing. A week of drying. A day of pressing and 2 months minimum of curing.

Technically ice wax isn't hash either. its not pressed.

Rosin aka solventless shatter. Takes about 10 minutes to make a gram from start to ready to smoke. so this thread is about extracts. at the top there is a pole

1. Butane blasting method
2. Kief tumbler
3. Bubble Bags
4. Morrocan bag and stick method
5. other ..see below

Anything made with dry trim.That trim should be cured for minimum of 3 month prior so the terpenes polymerize.

dry sift would probably be the fastest. You can get weight in minutes with that method

 

[qwizoking]

Stellate hairs in cannabis?

Rosin crap aside. Did you mean cystolithic hairs by chance?

Well carry on with yalls blabbering

The definition of hash is the collection of cannabis trichomes, no difference if its ruptured through pressing and heat or by solvent all is hash.
Unless you ask a certain frenchman
But that is the definition

 

[charlestonchunk]

Thank you sir! I am not making rosin...go to that threat. I just have a lb and want to know best way. I am going to ice drill...let it settle, at the end i will use a bounty roll (the quicker picker upper) and Wick it.up, im going to freeze fesh bud first ...then agitate......Im ok with plant material. I love flowers

 

[Gquebed]

Thank you sir! I am not making rosin...go to that threat. I just have a lb and want to know best way. I am going to ice drill...let it settle, at the end i will use a bounty roll (the quicker picker upper) and Wick it.up, im going to freeze fesh bud first ...then agitate......Im ok with plant material. I love flowers

Definition of hash:
this HTML class. Value is https://www.google.c

Given that kief is never particulate free it is technically hash too, whether oressed of not.

And actually there is no set time for making hash. Some spend months doing it, like some Afghans and Indians. Others spend weeks, like most Morocans. If you use high pressure hydraulics you dont even need heat and can do it in hours. There is no standard. Many different methods. Kief is generally thought of as being loose powder. When it is pressed it is called hash. But as said, technically it is hash even in loose form.

Since rosin is pressed rather than extracted with chemical i guess it too qualifies as hash. Pardon me...

 

[charlestonchunk]

It is not a question of speed, it is the wrong question, wrong attitude, wrong vision and has no future. Every producing countries in the world work fast to make quantity, do you really want to be part of the herd or and out for quality.

I think he meant was the easiest the easiest I have come to the conclusion ice hash unless you want crazy paraphernalia all over your house

 

[charlestonchunk]

Definition of hash:
this HTML class. Value is https://www.google.c

Given that kief is never particulate free it is technically hash too, whether oressed of not.

And actually there is no set time for making hash. Some spend months doing it, like some Afghans and Indians. Others spend weeks, like most Morocans. If you use high pressure hydraulics you dont even need heat and can do it in hours. There is no standard. Many different methods. Kief is generally thought of as being loose powder. When it is pressed it is called hash. But as said, technically it is hash even in loose form.

Since rosin is pressed rather than extracted with chemical i guess it too qualifies as hash. Pardon me...

I would love the gear /ambition/willingness to make it...its not a priority for me and I would fukitup my man..ice it is

 

[D_Urbmon]

Stellate hairs in cannabis?

Rosin crap aside. Did you mean cystolithic hairs by chance?

Well carry on with yalls blabbering

Nope that's not what I meant but I just googled that and thank you for giving me a name to those. I've always been curious of their name and if they eventually developed into trichomes. I even asked bubbleman and never got a response.

I