stardustsailor
Well-Known Member
This thread is going to be really slow in progression .
Photosynthetic Active Radiation Solid State Light Model : Jade.
Basic Parts List:
- 2x Bridgelux BXRC-30E10K0-L-xx.
- 2x MeanWell HLP-80-H-42.
- 1x MeanWell PS-05-12.
- 1x Noctua NF-P14 FLX
- 1x EMI filter AC IEC C14 socket
-1x heat sink 200 mm x 160 mm x 40 mm
- 1x case ~ 320W x 255D x 85H mm.
( I use this: http://www.venieris.com/ΗΛΕΚΤΡΟΝΙΚΑΗΛΕΚΤΡΟΛΟΓΙΚΑ/ΗλεκτρονικάΕίδη/tabid/122/CategoryID/2525/List/0/catpageindex/4/Level/a/ProductID/31889/Default.aspx )
1x tube Arctic silver 5 or other TIM with therm. cond. above ~ 5 W/m.K
Inox Screws
8x : M3 Allen 10 mm,Washer M3&M4 => Installing the 2x Veros
17x : M3 Allen ,M3 washer => case outside
4 x steel sheet screws => plate (case inside )
8x M4 Allen ,2x M4 washer ,M4 nut => Heat sink+ plate
4x M3 Allen flat countersunk ,4x M3 nuts ( Fan PSU )
8x M3 flat countersunk ,8x M3 nuts (2x LED PSU )
&
12x M3 zic-plated steel metal inserts.( as pcb spacers/colders )
Other
- 2x inox hanging posts
~ 25 Inox / aluminium rivets(riveting tool needed also ,a cheap one will do )
-1x INOX vent cover / square
Alum angles: 2 x 200 mm L 20 x 20 mm x 1.5 mm
Alum profile " π " :2 x 315 L mm 20 x 10 mm x 2 mm
10 led bar (green ) .
4017 decade counter IC .
(I use Texas Instruments CD4017BE )
1x 10 -100 nF ceramic capacitor smd 1206
1x 10 K resistor smd 1206
1x 1 K resistor smd 1206
DIY pcb FR4 single sided / copper 50 x 50 mm .
5 gr Potassium persulfate .
Tools:
Laser printer.
Bench drill ( drills HSS / Cobalt or Titanium 2.5 mm , 3 mm ,4 mm ,5 mm ,6 mm ,8 mm & 10 mm )
Sand papers (siclicone carbide )EU grits : 300 ,600 ,1000 & 2500
WD 40 or similar
M3 tapping bit or hand tool .
File set
Electric saw or disc rotary cutter.
Nitrile protective gloves
To be continued and enriched ...
Photosynthetic Active Radiation Solid State Light Model : Jade.
Basic Parts List:
- 2x Bridgelux BXRC-30E10K0-L-xx.
- 2x MeanWell HLP-80-H-42.
- 1x MeanWell PS-05-12.
- 1x Noctua NF-P14 FLX
- 1x EMI filter AC IEC C14 socket
-1x heat sink 200 mm x 160 mm x 40 mm
- 1x case ~ 320W x 255D x 85H mm.
( I use this: http://www.venieris.com/ΗΛΕΚΤΡΟΝΙΚΑΗΛΕΚΤΡΟΛΟΓΙΚΑ/ΗλεκτρονικάΕίδη/tabid/122/CategoryID/2525/List/0/catpageindex/4/Level/a/ProductID/31889/Default.aspx )
1x tube Arctic silver 5 or other TIM with therm. cond. above ~ 5 W/m.K
Inox Screws
8x : M3 Allen 10 mm,Washer M3&M4 => Installing the 2x Veros
17x : M3 Allen ,M3 washer => case outside
4 x steel sheet screws => plate (case inside )
8x M4 Allen ,2x M4 washer ,M4 nut => Heat sink+ plate
4x M3 Allen flat countersunk ,4x M3 nuts ( Fan PSU )
8x M3 flat countersunk ,8x M3 nuts (2x LED PSU )
&
12x M3 zic-plated steel metal inserts.( as pcb spacers/colders )
Other
- 2x inox hanging posts
~ 25 Inox / aluminium rivets(riveting tool needed also ,a cheap one will do )
-1x INOX vent cover / square
Alum angles: 2 x 200 mm L 20 x 20 mm x 1.5 mm
Alum profile " π " :2 x 315 L mm 20 x 10 mm x 2 mm
10 led bar (green ) .
4017 decade counter IC .
(I use Texas Instruments CD4017BE )
1x 10 -100 nF ceramic capacitor smd 1206
1x 10 K resistor smd 1206
1x 1 K resistor smd 1206
DIY pcb FR4 single sided / copper 50 x 50 mm .
5 gr Potassium persulfate .
Tools:
Laser printer.
Bench drill ( drills HSS / Cobalt or Titanium 2.5 mm , 3 mm ,4 mm ,5 mm ,6 mm ,8 mm & 10 mm )
Sand papers (siclicone carbide )EU grits : 300 ,600 ,1000 & 2500
WD 40 or similar
M3 tapping bit or hand tool .
File set
Electric saw or disc rotary cutter.
Nitrile protective gloves
To be continued and enriched ...
Last edited:
...
