gk skunky
Well-Known Member
Did a little thing for my buddy DXE real quick. He had asked for foot print info on the RW-150 see if he wants to check out A51 or stick with onyx on his next purchase in the future. So compiled this together. Figured I'd post here that some might find it useful for something. Here's the message I sent him. Oh yeah and these measurements were taken using an apogee SQ-120 quantum sensor.
Alright here's the data. I only did the RW-150, and the max height I could use with the little rig I made for that space was 34". So I took measurements every 12" starting with the corners/edges so there are 5 values each directions; corner, 12" in, center, 12" in, corner. So in the pics I just took the data cells from excel, centered everything and drew lines to make the perimeter. So the blue lines are the edges, and the 4 numbers on the outside edge next to them represent feet from center. So outter blue box is the 4', then 3', etc. The intersections where the numbers lay are pretty close to exact measurement points.
All units are mV*5 for units of umol/m^2/sec, or PPF if you will.
Alright here's the data. I only did the RW-150, and the max height I could use with the little rig I made for that space was 34". So I took measurements every 12" starting with the corners/edges so there are 5 values each directions; corner, 12" in, center, 12" in, corner. So in the pics I just took the data cells from excel, centered everything and drew lines to make the perimeter. So the blue lines are the edges, and the 4 numbers on the outside edge next to them represent feet from center. So outter blue box is the 4', then 3', etc. The intersections where the numbers lay are pretty close to exact measurement points.
All units are mV*5 for units of umol/m^2/sec, or PPF if you will.