Danks Update! come on friends.. take a look! let me know what you think?

[AllDayToker]

I don't under how I have grown 3 or 4 runs under this 600, but just now I'm seeing a heat issue?

It's reading 82f at 32" between the light and canopy. That seems high for that far away don't you think?

 

[SirGreenThumb]

I don't under how I have grown 3 or 4 runs under this 600, but just now I'm seeing a heat issue?

It's reading 82f at 32" between the light and canopy. That seems high for that far away don't you think?

Give me all your specs.

 

[Thundercat]

Is your exhaust fan slowly wearing out, or is it set at a reduced speed on a controller?

 

[SirGreenThumb]

Could be restriction. To many bends, filter on the exhaust end as well as extraction end.

 

[AllDayToker]

Give me all your specs.

Well it's a 600w cooltube in my closest that is 27" deep x 60"+ long x 72"+ high. I have just a 6in duct booster venting heat from the cooltube into another room. I have a small 4 or 5" floor fan on the open end of the cooltube sucking more air through, and then I have a tall 10" osculating floor fan I got going.

Is your exhaust fan slowly wearing out, or is it set at a reduced speed on a controller?

I don't have it on a controller, it's just a booster. I ran it for 3 or 4 runs just fine, now it seems high.

 

[AllDayToker]

Could be restriction. To many bends, filter on the exhaust end as well as extraction end.

I have no filters on it, end it open, and the length from the end of the tube to the vent hole where the booster is is probably 2-3ft total.

Like I said I've done several runs in the closest before with zero heat issues. Something must be wearing out on me.

 

[Thundercat]

That was my first thought, maybe the bearings in the fan were wearing out, and its not working as efficiently.

 

[AllDayToker]

I wish I had the money to just upgrade to a real in-line fan.

I think I have an extra 6" booster, maybe if I fix it to the open end of my cool tube it will get it down.

 

[Thundercat]

I had 2 booster fans back to back for the longest time cooling my 1k. It wasn't ideal but it worked. Now I have one booster that ducts into a cold air return for my house, so it pulls heat out and into my furnace. I've had an actual inline fan around for years now, just havn't wanted to chance it being loud.

 

[AllDayToker]

I had 2 booster fans back to back for the longest time cooling my 1k. It wasn't ideal but it worked. Now I have one booster that ducts into a cold air return for my house, so it pulls heat out and into my furnace. I've had an actual inline fan around for years now, just havn't wanted to chance it being loud.

Well tomorrow I'll wire up my other booster and throw it up on there. It sounds like that will solve my problem... Hopefully...

What order would you suggest? Booster > Cool Tube > Booster or Cool Tube > Booster > Boster

 

[~Dankster~420]

Aw.. yeah I bet its just cause he feels safe thats nuts he gets under the cover like that though.. haha Ginger likes to root. lol I can blow at ehr & she will root all under the covers. lol

Thanks..
I went to go see him and then I looked at his surroundings and I decided that I was just going to take him away from them people. He was free and they were shocked that I brought a cat carrier. He was terrified of the car ride home so I took off my shirt and put it in the cage with him.. One, so he would be comfortable with my scent and two so he could have a safe place away from the big world. Ever since he does things like:View attachment 3159633

 

[~Dankster~420]

this would be the SHIT!!!

The guy he is buying the place from is someone he worked with, super cool stoner dude.That's my buddy I was telling you all about with the cows n shit. Got a contract and a payment plan. On receipt of the last payment he is handing over the deed. It was only 40k for a two bedroom one and a half bath house and it sits on 5 wooded acres

 

[~Dankster~420]

they start off kinda slow, but you will see them explode into this.. start here: mid bloom: I just use a regular ol box fan bro & have a smaller one sucking the hot air out into my exhaust..

Just transplanted the first Purple Monkey, they look so small in the 2g s-pots. For now.... lol.

Anyone have suggestions on a good brand of in-line fans? I need to get one.

 

[SlimTim]

15 hours of work in today and still 1.5 hours away from home. Gonna get home roll a special blend and accidentally turn my alarm off for in the morning.
Hope all is good for everyone tonight!!!


Sent from my SM-N900V using Rollitup mobile app

 

[Thundercat]

Well tomorrow I'll wire up my other booster and throw it up on there. It sounds like that will solve my problem... Hopefully...

What order would you suggest? Booster > Cool Tube > Booster or Cool Tube > Booster > Boster

I've actually done both at different times ADT. I think I preferred booster-light-booster.

When I changed to my great white reflector the wiring wouldn't fit to mount one at each end, and I was to lazy to rewire it. Thats when I mounted them...light-boosterbooster. I hooked the fans right together and made sure they were both facing the same way . It was strong enough to cool my light sufficiently and pull through my carbon filter.

 

[~Dankster~420]

wonder if this 1 will do the job bro?? http://www.amazon.com/VenTech-DF8-Duct-Fan-400/dp/B005KMUHWY/ref=cm_wl_huc_item

This one works great for me.
http://www.amazon.com/gp/product/B005XNNYMU/ref=oh_details_o09_s00_i01?ie=UTF8&psc=1

 

[~Dankster~420]

SHEW!!! damn bro.. sorry. that sure sounds rough. I use to drive a tractor n trailer. I know all about them hours.. NO sleep mind you.. not easy..

15 hours of work in today and still 1.5 hours away from home. Gonna get home roll a special blend and accidentally turn my alarm off for in the morning.
Hope all is good for everyone tonight!!!


Sent from my SM-N900V using Rollitup mobile app

 

[~Dankster~420]

this reminds me.. I told Peach something I have been talking about now for over a year. lol did she happen to tell you about it? and or could it be done with that program bro??

Photoshop layer tutorial:

First you will need to open a pic you are wanting to animate. File > Open
After opening a pic, go to the window button and select layers (F7)..... After selecting layers, click the window button again and bring up animation..

View attachment 3159668

First make layers on the layer window by clicking this button: I used 10 in this example
View attachment 3159669
Next click on the animation layers:
View attachment 3159670

Done!

If you want to learn how to use the layers it would be best to watch a youtube video tutorial on the whole process. The process is basically turning off the layers you don't want to show at one point and on for the ones you do. Each time you place another pic into the frame you will want to select the layer you want it to appear on..

This gets difficult if you don't have a basic understand of how the program works. Its best to learn as much as you can about: Transformation (CTRL T) Placing and obviously layers.. Without these three main options you wont get anywhere.

This is a basic to show you where the layers are and where the animation tool is as well.

 

[~Dankster~420]

Which ones, how old? lol Where you are doing the 12/ 12 from seed, (if that's the ones your talking about), then I would keep them under the CFL'S, and or a T5 setup then move them to your 600 bro

I don't under how I have grown 3 or 4 runs under this 600, but just now I'm seeing a heat issue?

It's reading 82f at 32" between the light and canopy. That seems high for that far away don't you think?

 

[AllDayToker]

I've actually done both at different times ADT. I think I preferred booster-light-booster.

When I changed to my great white reflector the wiring wouldn't fit to mount one at each end, and I was to lazy to rewire it. Thats when I mounted them...light-boosterbooster. I hooked the fans right together and made sure they were both facing the same way . It was strong enough to cool my light sufficiently and pull through my carbon filter.

Alright awesome, thanks for the tip. I'll hook it up tomorrow then, should be plenty for my 600w.

Which ones, how old? lol Where you are doing the 12/ 12 from seed, (if that's the ones your talking about), then I would keep them under the CFL'S, and or a T5 setup then move them to your 600 bro

I just put the Purple Monkeys into 2g s-pots under the 600 tonight, tomorrow will be Day 1 of 12/12 for them. They are a week old. The temp should be lower now with the extra booster, so I can move the HPS closer, keep those nodes as tight as possible.