Extracting 2200 CF

[Rusty Shakelford]

HI All,, I am getting some more grow space soon and its adding up to 2200 Cubic Ft that I will need to extract.

Any suggestions on the Best method of doing this? Should I get one BIG fan, or use a couple positioned around the room?

Any Help would be much appreciated!!

 

[umhi]

I have a 1000+ sf flower room that has 2- 600cfm going out and passive air coming in. I had problems with yield in the beginning but after adding co2 it seems to work fine.

With that big of a space you are most likely running many lights so in my opinion more fans spread out would be ideal.

Sent from my SPH-L720 using Rollitup mobile app

 

[Rusty Shakelford]

Thanks for the Reply! This space will actually be for Mothers and Clones, but its all pretty much the same I will have passive intake and going to probably run a mini split for air and heat.

 

[SnapsProvolone]

Thanks for the Reply! This space will actually be for Mothers and Clones, but its all pretty much the same I will have passive intake and going to probably run a mini split for air and heat.

If you plan to run a minisplit, you could run a co2 generator/controller and a good dehumidifier then forget extraction with fans.

 

[Rusty Shakelford]

If you plan to run a minisplit, you could run a co2 generator/controller and a good dehumidifier then forget extraction with fans.

Thanks also for the reply!! Any suggestions on the co2 generator/controller I should be looking at? Keeping in mind that this is not the worlds biggest room. We are looking at 15' x 15' x 10'

 

[SnapsProvolone]

Sentinel makes a great setup. If you have natural gas or propane a co2 generator is the way to go.

If no fuel source is available your stuck hauling co2 tanks for refills. Use a fuzzy logic controller on a tank.

Venting would blow your air conditioning and co2 out of the room.

With co2 you can run a little warmer room temps.