I was reading an article about aeroponics in a magazine and it got me thinking I could make a two plant system out of some really big rubber maids. I was wondering if anyone has done anything like this? also any links or info on aeroponics and what substrate it best(if any?) the idea i got from the article was that you use a fogger and mist system for feeding and watering? basically any info that might help me to better understand this method and maybe try a DIY system. thanks so much.
DIY aeroponics
- Thread starter happyhigh
- Start date
cloudflyer
Well-Known Member
I don't even know where to start. Here is what I am going to do. I posted a msg so I am subscribed to the thread. I have to get up early. So speak up people and I will chime in tomorrow
johnq
Well-Known Member
check out the faq, they have decent plans/"blueprints" that can be modified to fit your situation. apart from that, its really basic, air and water is really all you need. then keep in mind the water is another part of your environment that needs controlled (temp+ph mostly, nutrients dont work without those two being right).
just built a modified version of this system have only done plain water test so far but looks like its going to work great for me. definantly worth taking a look at https://www.rollitup.org/hydroponics-aeroponics/22362-30-minute-6-plant-aero.html
techhead420
Well-Known Member
I can show you how to build a $10-$15 aero drip system if you'd like. It's a 2 liter pop bottle, some pvc, 2 inch net cup, an air pump, air stone and some tubing. It's an "air lift pump" system.
techhead420
Well-Known Member
Yeah, what I like about pea gravel is the higher mass which helps stabilize the plants (at least when they' smaller). The plant is actually in a rockwool cube that's been cut down and then I packed the pea gravel around it.
BTW Earl, my compliments on your "Aero Space Shuttle". As an engineer I can appreciate the work involved and the engineering that went into your system.
BTW Earl, my compliments on your "Aero Space Shuttle". As an engineer I can appreciate the work involved and the engineering that went into your system.
cloudflyer
Well-Known Member
If you can not answer the following questions with a yes then there is no point/benefit of growing Aeroponicly.
#1. Do you have HID lighting?
If you are not running HPS or MH at the very least 400w or higher (in a small area), then there is no point.
#2. Are you willing to use an advanced 3 part nutrient system and take the time to constantly monitor ph/ppm?
In order for the plant to thrive, it will eat a lot of food.
#3 Can you maintain your nutrient solution at a constant 60-65 degrees?
This one is super important. The entire purpose of aeroponics is to get more o2 to the roots. Cold water is dense and packed with o2. 75 degree hold 100x less o2 than 60 degree water.
The bottom line, if you cant provide these three things, go hydro.
More to come...
Earl
Well-Known Member
I use a two part nute system in my aero.
It grows very fast.
If you use RO,
then the pH can be stable for days.
I keep my rez at 68º,
just to save money on cooling,
but some run temps as low as 50º
Keeping the temp 68º or lower is mandatory,
for a trouble free grow.
Show your grow.
It grows very fast.
If you use RO,
then the pH can be stable for days.
I keep my rez at 68º,
just to save money on cooling,
but some run temps as low as 50º
Keeping the temp 68º or lower is mandatory,
for a trouble free grow.
Show your grow.
cloudflyer
Well-Known Member
Alright
There are three main types of indoor aeroponics.
Beat it into submission
High PSI Pumps
or
Pressurized system
Most people think about different types of nozzles. The pump defines the nozzle, your wallet and space defines the pump.
Beat it into submission.
Mini sprinkler heads, spinning disks, and tubes with pin holes.
Technically this is not really Aeroponics. It's still effective, but it is hydroponics. The water droplets they produce are quite large in comparison to other methods. These types of systems are usually in small containers or PVC fence posts. This is a bad thing because the purpose of aeroponics is to suspend the roots. a puddle forms when the roots hit bottom and it becomes more of a deep water culture. They use a pump you can buy at wal-mart for under $50. Again not really aeroponics.
http://www.hydroponic-aeroponic.com/images/root_pics/sprinkler1.jpg
High PSI pumps like this one
Ecoplus 250 Pump by Horizen Hydroponics
allow you to use mist nozzles like these
DIG CORP: Series EXL 500 low flow fogger
This is aeroponics, the droplets are very fine. If your roots hang, you will be very happy.
And then there is pressurized systems that have pre pressurized tanks that put out very high PSI. Ultra small droplets, but very costly.
The blue bins are a great idea because they allow roots to dry off in minutes, then they are sprayed again (requires special timer for the last 2 systems)
There are three main types of indoor aeroponics.
Beat it into submission
High PSI Pumps
or
Pressurized system
Most people think about different types of nozzles. The pump defines the nozzle, your wallet and space defines the pump.
Beat it into submission.
Mini sprinkler heads, spinning disks, and tubes with pin holes.
Technically this is not really Aeroponics. It's still effective, but it is hydroponics. The water droplets they produce are quite large in comparison to other methods. These types of systems are usually in small containers or PVC fence posts. This is a bad thing because the purpose of aeroponics is to suspend the roots. a puddle forms when the roots hit bottom and it becomes more of a deep water culture. They use a pump you can buy at wal-mart for under $50. Again not really aeroponics.
http://www.hydroponic-aeroponic.com/images/root_pics/sprinkler1.jpg
High PSI pumps like this one
Ecoplus 250 Pump by Horizen Hydroponics
allow you to use mist nozzles like these
DIG CORP: Series EXL 500 low flow fogger
This is aeroponics, the droplets are very fine. If your roots hang, you will be very happy.
And then there is pressurized systems that have pre pressurized tanks that put out very high PSI. Ultra small droplets, but very costly.
The blue bins are a great idea because they allow roots to dry off in minutes, then they are sprayed again (requires special timer for the last 2 systems)
Attachments
cloudflyer
Well-Known Member
Thats a great idea, I am going to have to try that. I use expanded clay pellets in 3" net pots. Not as a medium but for support. Your idea is much better. Im with you too on the brown spounge instead of rockwool. I hate rockwool, at first it sheads, cloging shit up. Plus it needs to be ph balanced.