Random Jibber Jabber Thread

Flaming Pie

Flaming Pie

Well-Known Member
I really wish someone would talk to me. I am so paranoid right now.

Part of me is like, he is there to do a job and shouldn't give a shit. Prob won't even say anything.

Another part of me is like, fuck!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 
UncleBuck

UncleBuck

Well-Known Member
space heater for the baby, change out the thermostat (could be why the furnace is not firing), cancel the repair guy.
 
slowbus

slowbus

New Member
Flaming Pie said:
I really wish someone would talk to me. I am so paranoid right now.

Part of me is like, he is there to do a job and shouldn't give a shit. Prob won't even say anything.

Another part of me is like, fuck!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...

how many plants do you have going?
 
Unclebaldrick

Unclebaldrick

Well-Known Member
Flaming Pie said:
I really wish someone would talk to me. I am so paranoid right now.

Part of me is like, he is there to do a job and shouldn't give a shit. Prob won't even say anything.

Another part of me is like, fuck!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Fingers crossed for you. My guess is that it'll be fine.
 
slowbus

slowbus

New Member
joe macclennan said:
repair man must be there
Click to expand...

I can't imagine not having a back up plan for heat.And I can't imagine having utilities in my room like that if I can't do my own work.......

a little less time with her legs up in the air and a little more time at home depot....(sorry FP-had to bust your chops):mrgreen:
 
M

minnesmoker

Well-Known Member
kinetic said:
As a community I am embarrassed that a beiber thread is so popular here. Oh how the mighty have fallen...
Click to expand...
Really? Apparently kid was set up, or stopped on false pretense. Everything that followed is fruit of the poison tree. I personally hope he walks without a scratch.

Guess yer not loving my avatar than, either, are ya'?
 
hexthat

hexthat

Well-Known Member
This is going to be my first attempt at making my own 1 part cannabis hydro nut

Oxidane (H2O) - 1000000mg/l
Calcium Nitrate, Tetrahydrate - 5892.752 mg/L
Magnesium Sulfate, Heptahydrate - 5070.994 mg/L
Potassium Nitrate - 3255.771 mg/L
Potassium Phosphate, Monobasic, Anhydrous - 2983.343 mg/L
Ammonium Phosphate, Monobasic - 821.018 mg/L
Potassium Bicarbonate - 413.247 mg/L
Ferrous Sulfate, Heptahydrate - 199.104 mg/L
Boric Acid - 40.034 mg/L
Manganese Sulfate, Monohydrate - 27.689 mg/L
Zinc Sulfate, Heptahydrate - 3.079 mg/L
Cupric Sulfate, Pentahydrate - 1.965 mg/L
Sodium Molybdate, Dihydrate - 1.261 mg/L

gana get a bid from http://www.caissonlabs.com/
 
Flaming Pie

Flaming Pie

Well-Known Member
I had checked all the troubleshoots on the furnace. I had thought I fixed it after some on the phone instruction but no bueno. The pilot would come on and sometimes the burner would come on but it would shutt itself off eventually.


The guy found the problem. It was a corroded circuit board. Hubby thinks he'll be able to repair.

I would never have found that. I would of had to understand how a furnace works to notice the exhaust fan thingy stopped spinning an since no fume exhaust the burners turn themselves off as a safety. Which is a relief because I was scared the house was going to blow up because I smelled something funny when I got home.

The temp had dropped to 66 degrees in the house and I was scared of gas leak or house go boom.

Yes I am aware that the furnace room is not the ideal grow location, but is the only space I have.
 
Flaming Pie

Flaming Pie

Well-Known Member
Unclebaldrick said:
Fingers crossed for you. My guess is that it'll be fine.
Click to expand...
Guy was real nice. Was super patient with me asking 20 questions about everything so I could completely understand our options. He coulda stopped at " this furnace is old and many of the parts appear to be worn. " recommended a new furnaces and charged us, but instead he spent an extra HOUR explaining every thing to me.

When he noticed the fan was the problem, he even pulled out the circuit board so I could see it and then explained why I needed a new one (corrosion)

When husband said he might be able to fix he showed my husband exactly what and where needed fixing.

Only charged us for the diagnosis and didn't charge us for the extra hour he was there.

Still made sure to lock the doors, but I think I may be good. And if nothing else, I now have an hvac guy I can call.
 
neosapien

neosapien

Well-Known Member
Glad everything worked out Pie.

That's the nice thing about having a trade, you meet people in other trades. I can and do alot by myself but got a couple guys that don't ask questions when shits over my head.
 
Nutes and Nugs

Nutes and Nugs

Well-Known Member
Flaming Pie said:
Guy was real nice. Was super patient with me asking 20 questions about everything so I could completely understand our options. He coulda stopped at " this furnace is old and many of the parts appear to be worn. " recommended a new furnaces and charged us, but instead he spent an extra HOUR explaining every thing to me.

When he noticed the fan was the problem, he even pulled out the circuit board so I could see it and then explained why I needed a new one (corrosion)

When husband said he might be able to fix he showed my husband exactly what and where needed fixing.

Only charged us for the diagnosis and didn't charge us for the extra hour he was there.

Still made sure to lock the doors, but I think I may be good. And if nothing else, I now have an hvac guy I can call.
Click to expand...
Did you get his name so you can request him next time?

I had a guy that was helpful a few years ago.
He was honest and told me " you know more about this furnace than I do" and charged me a basic house call.

Turned out to be the same problem as yours, power vent not turning on.
I heard it humming but the motor wasn't turning.

Fixing that board may be more problems than just ebaying a new - used board.
 
clint308

clint308

Well-Known Member
WinterClasses for Women at
THE ADULT LEARNING CENTRE

REGISTRATION MUST BE COMPLETED
By Friday, January 31st, 2014

NOTE: DUE TO THE COMPLEXITY AND DIFFICULTY LEVEL
OF THEIR CONTENTS, CLASS SIZES WILL BE LIMITED TO 8 PARTICIPANTS.
Class 1
Up in Winter, Down in Summer - How to Adjust a Thermostat
Step by Step, with Slide Presentation.
Meets 4 weeks, Monday and Wednesday for 2 hrs beginning at 7:00 PM.

Class 2
Which Takes More Energy - Putting the Toilet Seat Down, or Bitching About It for 3 Hours?
Round Table Discussion.
Meets 2 weeks, Saturday 12:00 for 2 hours.

Class 3
Is It Possible To Drive Past Myers Without Stopping?--Group Debate.
Meets 4 weeks, Saturday 10:00 PM for 2 hours.

Class 4
Fundamental Differences Between a Handbag and a Suitcase--Pictures and Explanatory Graphics.
Meets Saturdays at 2:00 PM for 3 weeks.

Class 5
Curling Tongs--Can They Levitate and Fly Into The Bathroom Cabinet?
Examples on Video.
Meets 4 weeks, Tuesday and Thursday for 2 hours beginning
At 7:00 PM

Class 6
How to Ask Questions During Commercials and Be Quiet During the Programme.
Help Line Support and Support Groups.
Meets 4 Weeks, Friday and Sunday 7:00 PM

Class 7
Can a Bath Be Taken Without 14 Different Kinds of Soaps and Shampoos?
Open Forum.
Monday at 8:00 PM, 2 hours.

Class 8
Health Watch -They Make Medicine for PMT - and How To Use It!
Three nights; Monday, Wednesday, Friday at 7:00 PM for 2 hours.

Class 9
I Was Wrong and He Was Right!--Real Life Testimonials.
Tuesdays at 6:00 PM Location to be determined.

Class 10
How to Parallel Park In Less Than 20 Minutes Without an Insurance Claim.
Driving Simulations.
4 weeks, Saturday's noon, 2 hours.

Class 11
Learning to Live - How to Apply Brakes Without Throwing Passengers Through the Windshield.
Tuesdays at 7:00 PM, location to be determined

Class 12
How to Shop by Yourself.
Meets 4 weeks, Tuesday and Thursday for 2 hours beginning at 7:00 PM.

Upon completion ofANY of the above courses, diplomas will be issued to the survivors.

 
Flaming Pie

Flaming Pie

Well-Known Member
Nutes and Nugs said:
Did you get his name so you can request him next time?

I had a guy that was helpful a few years ago.
He was honest and told me " you know more about this furnace than I do" and charged me a basic house call.

Turned out to be the same problem as yours, power vent not turning on.
I heard it humming but the motor wasn't turning.

Fixing that board may be more problems than just ebaying a new - used board.
Click to expand...
My husband works on stuff like this all the time. If he fixes it, we will have saved 250-300 dollars.
 
You must log in or register to reply here.
Top