net pots

Hello all. I’m looking for some input on a system I just built from spare parts. Im fairly new to hydro so all tips are appreciated. I have 12 5gal buckets with 4” net pots that I’ve cut rock wool cubes to fit in. The net pots only hang about 4” down into the buckets. So far it seems good, I...

Hi rollitup members!!! I have a 40 gallon tote build that I customed. Parts list 6. 1/2"x24" pvc was used to build one 40 gallon tote. 7. 90° Elbow 18.360 misters 1. Elbow tee 8. Tee. 1. 1/2"x1/2" male adapter or coupler The break down I used a pvc cutter 2. 9" 4. 8 1/2" 2. 7 1/2" 4. 6 1/4"...

Hi rollitup !!! I have a 40 gallon tote build that I customed. Parts list 6. 1/2"x24" pvc was used to build one 40 gallon tote. 7. 90° Elbow 18.360 misters 1. Elbow tee 8. Tee. 1. 1/2"x1/2" male adapter or coupler The break down I used a pvc cutter 2. 9" 4. 8 1/2" 2. 7 1/2" 4. 6 1/4" 8...

Setting up a system using 4"pvc pipe, and 3" net pots, I got the recommended 2 7/8" (73MM) hole saw, on a flat surface it works perfect, cuts flush, no side play between net pots and the drilled hole. The problem is on the convex surface of the pvc pipe it makes a hole that is too large and the...

Hi guys, I'm building a low pressure aeroponics system using a 145 litre tote. I would like to grow 4 plants, in a scrog grow. Please could my peers help out with some advice? 1. What size netpot would you recommend? Will 3 inch pots be large enough? 2. Must the water level be touching the...

This is my second go around with a dwc bubbleponics system. I decided to build a typical 6 spot system with stuff that was laying around from the previous bubble cloner that I had made awhile back. My system is working great but I have 2 issues that need to be fixed ASAP. First off the bag of...