water temps
- Thread starter DrFever
- Start date
soil=room temp
DWC=room temp
DWC=room temp
Chirpin4th
Member
67-68 thats kinda just where it sits. as long as the temp of the room is between 75-85
HomeGrownHairy
Well-Known Member
You got a fan blowing straight on the tank? That'll help cool the mix...Roots like cool water. Not under 60, but low 60's is perfect
MightyZeppelin
Well-Known Member
Definitely under 70, I keep mine at about 65.
DrFever
New Member
thanks guys i am a soil grower and dipping in bubble ponics made a cloner day 5 and still no roots have bun upgrading system heater controler etc, i have 60 gallon walmart punp, in approx 40 gallons of water and totally lost in the paramaters just want it dialed in
I here people get roots in 4 days or is it a myth ???? i realize diff strains i am 98 percent good at cloneing in soil
do i keep it around 65 degrees an stems 1 " into the water or above water i get lots of bubbles and spraying
I here people get roots in 4 days or is it a myth ???? i realize diff strains i am 98 percent good at cloneing in soil
do i keep it around 65 degrees an stems 1 " into the water or above water i get lots of bubbles and spraying
dart420
New Member
just depends on if your running beneficial bacteria or not. i used to keep my res at 68 and i now keep it at 72 since im using bene's in my res. and as for cloning you want the water at 75-78 and i clone in a 3 gallon bucket half full with a airstone bubbling is enough moisture to pull roots.i just got a lid for the 3 gallon bucket, drilled several 1 7/8" holes and use the foam collars to hold the clones. iv had roots in 6 days.
BeaverHuntr
Well-Known Member
Be patient roots can take up to two weeks to start showing .