shotnva777
Well-Known Member
So I have two 600w MH High Bays. I got them for free and after disassembling, realized that the ballast were no good. The reflectors and sockets are all im salvaging.
The question is, can I get a Digital Ballast (like pictured) and run 600w from it, to my light socket? The only problem I see with doing this, is the cord coming from the ballast to the light fixture - it's some sort of plug (attached photo of “extension plug”) My sockets only has 2 wires and the ground.
If I spliced this cable, could I hard wire it into my socket, which will be in my helmet?
(PS: this ballast would only run one 600w bulb, not both of my sockets. I will be buying another ballast for that helmet setup)
The question is, can I get a Digital Ballast (like pictured) and run 600w from it, to my light socket? The only problem I see with doing this, is the cord coming from the ballast to the light fixture - it's some sort of plug (attached photo of “extension plug”) My sockets only has 2 wires and the ground.
If I spliced this cable, could I hard wire it into my socket, which will be in my helmet?
(PS: this ballast would only run one 600w bulb, not both of my sockets. I will be buying another ballast for that helmet setup)
