Stealth Cabinets

B

BudBaby

Active Member
Right guys this is a follow on from the stealth draws thread i was doing under a different username. Ill use this as a build diary.

Just waiting for stealthy to confirm what else i need along with the 8" fan and Filter so we can get the cabs lined and all holes cut out.

When ive done that ill be ordering all the lights:)
 
B

BudBaby

Active Member
Oh stealthy misses say im limited to 1 hole in the wall and one into the attic via the wardrobe lol. I think she will come round when its all up and running. I think thats all we need anyway.
 
stelthy

stelthy

Well-Known Member
Yeah man I hear ya :) lol ...Just found you :) I am well pissed lol Too much Stella n smelly chhese n biscuits lol huh huh lol :) 1 holes all you'll need :) yeah she'll be impressed when its all n running :) - STELTHY :leaf:
 
B

BudBaby

Active Member
Will just buying the fan and filter be enough to get all the cab lined and all holes drilled?

I can get the other stuff as soon as cab is up.
 
stelthy

stelthy

Well-Known Member
Concentrate on getting the cab up and the Mylar installed + Many a piucture, picture ..oops lol Picture :) When you post the pics of what you have ..I'll instruct you what to do next :) - STELTHY :leaf:
 
B

BudBaby

Active Member
Ok mate will do i thought id need the fan and filter first though for pre drilling. If you can just get back to me today and let me know the minimum i need to buy now to get everything lined and all holes drilled before i assemble the cab ill order it today.

Ill get 8" thermo ruck fan and rhino filter and whatever else i need to get the cab up as quick as possible. Lights etc will then be to follow once its up:)
 
stelthy

stelthy

Well-Known Member
BudBaby said:
Ok mate will do i thought id need the fan and filter first though for pre drilling. If you can just get back to me today and let me know the minimum i need to buy now to get everything lined and all holes drilled before i assemble the cab ill order it today.

Ill get 8" thermo ruck fan and rhino filter and whatever else i need to get the cab up as quick as possible. Lights etc will then be to follow once its up:)
Click to expand...
Ok erm...Get :-


* 8" Ruck Fan, (see pic)

* 8" to 6" reducer X1 (Aluminium/steel) (see pic)

* Rhino Filter (see pic)

* 2x 6" LARGE Odor Socs, (see pic)

* 4X 6" 45 degree elbow's (Aluminium/steel), (see pic)

* Silver duct tape
* Spray adhesive
* Staple gun
* 6" Flange piece X2 (see pic)

* 3m Ventilation ducting (see pic)

* 15m of insulated acoustic ducting (see pic)

* 4X timers (see pic)

* 12-way surge protected extension lead (see pic)

*Medium tub of Oxy Plus (see pic)


The Oxy Plus isn't essential for the list, but I thought I'd add that to the list so I didn't forget cos I need to get some more too :)

And that pretty much covers it :) - STELTHY :leaf:
 
D

dungie

Member
Shall i make that a thermo fan?

Sorry mate im a bit confused, been sorting my internet connection out all day. All i want to buy at this stage is what i need to to line and assemble the cab. Could we get the holes drilled without all of that stuff above.

I presumed we needed the filter and fan now to measure up in the cabinet but if we can wait until the cab is up and built ill do that.

Let me know pal and cheers again for the help.
 
stelthy

stelthy

Well-Known Member
dungie said:
Shall i make that a thermo fan?

Sorry mate im a bit confused, been sorting my internet connection out all day. All i want to buy at this stage is what i need to to line and assemble the cab. Could we get the holes drilled without all of that stuff above.

I presumed we needed the filter and fan now to measure up in the cabinet but if we can wait until the cab is up and built ill do that.

Let me know pal and cheers again for the help.
Click to expand...
You could wait n buy the fan and carbon filter later, But it would be more helpful to get all that stuff asap cos we need to put all the items in place to work out where the holes should be positioned :)

In the past I have estimated sizes and there are always problems...Its best to have the actual stuff to draw around/position then at least you'll know every thing will be correct and fit as it should.

We need the fan and filter in the unit so we know where to make the duct hole, and we need the other components so they all fit perfectly and in their correct places too,
Hope its ok to do that...Another plus side is the unit will be looking very pro and you can get all the cutting etc all done at once :) What do you think ? -STELTHY :leaf:

*
 
D

dungie

Member
Excellent thanks mate nearly ordered 8". Ive got 5mtrs of ventillation but ill have to get the 6" acoutic ducting from elsewhere as they are out of stock.
 
stelthy

stelthy

Well-Known Member
dungie said:
Excellent thanks mate nearly ordered 8". Ive got 5mtrs of ventillation but ill have to get the 6" acoustic ducting from elsewhere as they are out of stock.
Click to expand...
5m will be more than enough of the standard ducting :), And ok Do you know where your going to get the insulated stuff from yet? - STELTHY :leaf:
 
stelthy

stelthy

Well-Known Member
dungie said:
No mate ive got everything barring odour socs and acostic ducting. May check ebay.

Those 8 way extension leads were 80 quid each so i left them.

Will a normal extension lead with surge charge do or so i need those specific controlers? Just let me know.

Found these, maybe ive got the wrong thing? http://www.kenable.co.uk/product_info.php?products_id=3684
Click to expand...
the 8-ways were £80 SHIT thats pricey...I got mine from B&Q for 25 each... Any one really, but I use the ones simerlar to in the pic v. good quality :) - STELTHY :leaf:
 
You must log in or register to reply here.
Top