the plants will be out of the room in my veg room . the room has a 800 cfm fan that runs to a stealth air box 2. i am thinking if i paint the floor with the radiant heat on it should dry quick. my main concerns are residual fumes harming the plants. i know when you paint a room in your house there is no concern for house plants but in a growroom you have a very high plant to area ratio. thanks man
How about a handful of sand mixed in with the floor paint? It may not be pretty but, it will work for traction.
Sand in paint destroys mops. makes it hard to clean and sterilize if you where to have pest intruders, fungus, mold, mildew, etc. Flat white on a cheap $11.00 pannel, works pretty damm good for floating partition walls constructed out of 2x2 firing strips, floors, fan boxes, even the construction of a custom size door in the room
Well this person may have done some research but I put it in action . I have different screen settings for each aspect of the grow. The 1kw/hps HID remains four feet above the rock throughout the grow , for various reasons. I install ceiling hooks and use duct tape and steel wire for wrapping rebar which is easy to bend with a pair of plyers but way more than strong enough to hang the reflectors. They're right about the grit in the paint. It will make it harder to mop. I like to skirt my 3'x 3' x 7" plantpot with four dual four foot flouro's (2 t5 daylight per side). NOTES" Tear off 3" pieces of duct tape and overlap the the top edge of the reflector on each side about one foot apart. Poke the steel wire through the duct tape and plastic. like a shower curtain. Cut a piece of wire as long as need be, bend a hook on each end and use them for suspention. The pieces of tapes are to make the hole from ripping...wel it still can be pulled down like any other curtain. These reflectors move easily so you can work around your plants without being all hemmed in. In any event photo impressions will happen to expose surfaces when subjected to 1k/w HID lighting. This includes the floor.
