Put the J down and help me out

snodegd

Active Member
I haven't done this in ten years so I consider myself a newbie again(finally have space). I will tell what I have and how its set up. Can you/anyone tell me what to look out for, change, general advice. I HAVE NOT STARTED BUT ITS ALL SET UP.

Please tell me if I posted in the wrong area and thanks for any help provided.

Location: Attic

room 1: Flower - demensions: 5'6" wide x 5 long x Height varies from 5'6" to 3', 3'6"(Attic)

Room 2: Veg - Same height as above but 4'W x 4'L

Room 3: Clone - Same as veg but 3' W x 3" L

All rooms are completely seperated(No light transfer)

Room set ups( Light medium etc)

Room 3:
Aeroponics 25 site cloner with no dome
Air stone installed
Clone gel and root juice
Ballast: 4' T12(2)
CO2 home made with yeast, sugar, water gallon jug

Room 2:
Medium or system yet(Advice)
Reflector: Growzilla dual light, max 2k
Mylar covered

Room 1:
Hydrofarm drip system 8 site
Aeroponics system 6 site
4' light rail
Relector - 2 x 6" cool tubes(Non rail one has 190 cfm fan from house to cool)
Ballast - 2 x 400watt hps/mh Lumateks
CO2 home made with yeast, sugar, water gallon jug
Fans - 2 x 190 cfm( both intake one through one of the reflectors one to circulate air)
Bulbs - 1 hps(Hortilux Super), 1 MH(Hortilux Blue)
Water chiller - 1/5 hp polar bear
Humidity gage
Air temp gage
timers
Charcoal filter( Needs to be hooked up, Advice? rated at 340 mor 400 cfm)


Chemicals:
flora base
flora grow
flora folwer
clone gel
rooot concentrate
Gallon of base, grow and bloom from local store

Superthrive
silica
Potash(0-0-22)

Meduims: Hydrocroton for aero, farm and clone plugs not rockwool but forget name

Seeds:
Low ryder: Easy ryder Dwarf( ak47 and lowryder 2) Fem

G13: poison Dwarf(NL 2 and Mexi Ruder)
Reg

Buddha: White Dwarf(Ruder and Indica) Fem

Joint Doctors: Diesel ryder( Soma Diesel 2 and lowryder 2) Reg

Dinafem: Blue widow( Haze skunk NL)Reg

DNA: La Women(?)Fem

DNA: Sour Cream(Sour diesel and g13 Haze)Fem

DNA: LA Confidential( OG LA Affie and Afghani) Fem


Let me know if other info I need to put for you to be able to help.

What room changes add ons?
What equip chnages adds?
What seeds to add and which to grow?
Nute help?
Clone and germ help please


Thanks!!!!
 

StreetRider

Active Member
RootTech cloning gel. Don't make big clones. Clone small and grow them big. Warmth is your friend. Humdiity is your friend. Cove them with a doam for the first couple of days.

sharp razor blades, clean everything with rubbing alcohol. cut your stem just below a side shoot at a 45 degree angle. Keep you clone medium damp, not soaded. You will have no problem.
 

Green Cross

Well-Known Member
I haven't done this in ten years so I consider myself a newbie again(finally have space). I will tell what I have and how its set up. Can you/anyone tell me what to look out for, change, general advice. I HAVE NOT STARTED BUT ITS ALL SET UP.

Please tell me if I posted in the wrong area and thanks for any help provided.

Location: Attic

room 1: Flower - demensions: 5'6" wide x 5 long x Height varies from 5'6" to 3', 3'6"(Attic)

Room 2: Veg - Same height as above but 4'W x 4'L

Room 3: Clone - Same as veg but 3' W x 3" L

All rooms are completely separated(No light transfer)

Room set ups( Light medium etc)

Room 3:
Aeroponics 25 site cloner with no dome
Air stone installed
Clone gel and root juice
Ballast: 4' T12(2)
CO2 home made with yeast, sugar, water gallon jug

Room 2:
Medium or system yet(Advice)
Reflector: Growzilla dual light, max 2k
Mylar covered

Room 1:
Hydrofarm drip system 8 site
Aeroponics system 6 site
4' light rail
Relector - 2 x 6" cool tubes(Non rail one has 190 cfm fan from house to cool)
Ballast - 2 x 400watt hps/mh Lumateks
CO2 home made with yeast, sugar, water gallon jug
Fans - 2 x 190 cfm( both intake one through one of the reflectors one to circulate air)
Bulbs - 1 hps(Hortilux Super), 1 MH(Hortilux Blue)
Water chiller - 1/5 hp polar bear
Humidity gage
Air temp gage
timers
Charcoal filter( Needs to be hooked up, Advice? rated at 340 mor 400 cfm)


Chemicals:
flora base
flora grow
flora folwer
clone gel
rooot concentrate
Gallon of base, grow and bloom from local store

Superthrive
silica
Potash(0-0-22)

Meduims: Hydrocroton for aero, farm and clone plugs not rockwool but forget name

Seeds:
Low ryder: Easy ryder Dwarf( ak47 and lowryder 2) Fem

G13: poison Dwarf(NL 2 and Mexi Ruder)
Reg

Buddha: White Dwarf(Ruder and Indica) Fem

Joint Doctors: Diesel ryder( Soma Diesel 2 and lowryder 2) Reg

Dinafem: Blue widow( Haze skunk NL)Reg

DNA: La Women(?)Fem

DNA: Sour Cream(Sour diesel and g13 Haze)Fem

DNA: LA Confidential( OG LA Affie and Afghani) Fem


Let me know if other info I need to put for you to be able to help.

What room changes add ons?
What equip chnages adds?
What seeds to add and which to grow?
Nute help?
Clone and germ help please


Thanks!!!!
Welcome back to the growing world. I've recently picked it back up again, and it's like riding a bicycle...

1. The one thing that strikes me right away is that "190 cfm" exhaust fan. That won't do the job, unless I missed a bigger blower on the list somewhere, and carbon filters cut your CFM in half.

2. It's easy to DIY a carbon scrubber, but the carbon isn't cheap. I guess it depends what your budget is.

3. Potash(0-0-22) this probably isn't even needed if you have K in the other nutes. Just be real careful with that, because too muck K may inhibit THC production. I don't remember where I read that, but I'm sure a google search would turn it up.

4. If these areas aren't somewhat air tight, with separate light cooling, you're yeast bottles may going to waste. You may just want to add an oscillating fan instead, the increased airflow will allow greater CO2 uptake.

5. clone plugs not rockwool but forget name. I forget the name too, but those things work great!

Nice strains :peace:
 

snodegd

Active Member
Welcome back to the growing world. I've recently picked it back up again, and it's like riding a bicycle...

1. The one thing that strikes me right away is that "190 cfm" exhaust fan. That won't do the job, unless I missed a bigger blower on the list somewhere, and carbon filters cut your CFM in half.

2. It's easy to DIY a carbon scrubber, but the carbon isn't cheap. I guess it depends what your budget is.

3. Potash(0-0-22) this probably isn't even needed if you have K in the other nutes. Just be real careful with that, because too muck K may inhibit THC production. I don't remember where I read that, but I'm sure a google search would turn it up.

4. If these areas aren't somewhat air tight, with separate light cooling, you're yeast bottles may going to waste. You may just want to add an oscillating fan instead, the increased airflow will allow greater CO2 uptake.

5. clone plugs not rockwool but forget name. I forget the name too, but those things work great!

Nice strains :peace:
1. I have two intake for temp controls but need an exhaust any advice?

2. I have a diy carboon on the intakes and have a canister just need fan for exhaust.

4. Nice, got it but didn't think to list.

Thanks and let me know about what fan you would rec.
 

snodegd

Active Member
RootTech cloning gel. Don't make big clones. Clone small and grow them big. Warmth is your friend. Humdiity is your friend. Cove them with a doam for the first couple of days.

sharp razor blades, clean everything with rubbing alcohol. cut your stem just below a side shoot at a 45 degree angle. Keep you clone medium damp, not soaded. You will have no problem.

Got the gel if I didn't list

What would you change?

Can you even clone auto dwarfs since they are on a time schedule and flowering time is not controlable?
 
Top