Plant droopy and not drinking DWC

xelif

Member
Hi guys i need urgent help! Today i noticed my plant didnt drink. Normally they would drink quite a fair bit everyday, i noticed the day before the ppm went up from 1300 to 1500 and i topped up ph adjusted water till 1200ppm. Ph is at 6.1 and adjusted to 5.7
Today i noticed plant didnt drink and ph is 5.8 ppm is 1200ppm.

Plant is droopy all around. This is 3rd week proper into flowering buds forming all around. I'll take pics of plant and roots please any help will be appreciated

Plant: amnesia haze
Type: sativa
Medium: DWC
ANY HELP IS APPRECIATED.
Please guide me what to do next i just changed out the res to plain water for now. No ppm only ph adjusted
 

Attachments

  • image.jpg
    image.jpg
    1 MB · Views: 179
  • image.jpg
    image.jpg
    823.6 KB · Views: 167
  • image.jpg
    image.jpg
    936.5 KB · Views: 146
looks like she is drowning. lower the water level in the bucket. like you need to have the water level a couple inches below where the bottom of the netpot sits in the bucket, understand?
 
Hi guys i need urgent help! Today i noticed my plant didnt drink. Normally they would drink quite a fair bit everyday, i noticed the day before the ppm went up from 1300 to 1500 and i topped up ph adjusted water till 1200ppm. Ph is at 6.1 and adjusted to 5.7
Today i noticed plant didnt drink and ph is 5.8 ppm is 1200ppm.

Plant is droopy all around. This is 3rd week proper into flowering buds forming all around. I'll take pics of plant and roots please any help will be appreciated

Plant: amnesia haze
Type: sativa
Medium: DWC
ANY HELP IS APPRECIATED.
Please guide me what to do next i just changed out the res to plain water for now. No ppm only ph adjusted
looks like on set of root rot
 
clean your airstone.. when i ran dwc my airstone always gets gunked up and doesnt make as much air. no O2 to the roots makes plants droopy. just take them out and clean with. I normally go 3/4 bucket for dwc to prevent too much ppm and pH drifts.
 
take a reading of ur rez temps also ph should be down to 5.5 room temps and what u are feeding superthrive ?? with airstones ??
 
if you smell your roots and it smells like ass then its root rot. also you can test by lightly tugging the roots and see if any dead roots come off..
 
if you smell your roots and it smells like ass then its root rot. also you can test by lightly tugging the roots and see if any dead roots come off..
yeah i gave up on dwc couldent be fucked with it any more substrate mix is the shit
 
Temperature is good and well controlled. I tried lightly pulling the roots, some fine root hair fell off but not like a whole clump or anything substantial, there are some roots that are very healthy looking. Roots doesn't smell of anything as of now. this happened like just OVERNIGHT, could it be a case of nute lock? It went up to 1500 the day before and maybe it got hurt then? im not sure. What should i do in this event?

Btw roots are in no way slimy or anything, but roots are in a bloody messy clump. Do you think i should cut part of it off so that it can grow properly? Could it be a tight root ball problem?
 
Things are looking worst today... Hope someone has any answers to my prayers. I just put h202 into the tank to clean the roots up. Now doing another res change. I notice is slightly murky with fine root hairs around the res. any help is welcome thank u
 

Attachments

  • image.jpg
    image.jpg
    673.7 KB · Views: 36
I see curled up leaves, nute burn? Are you running just water now? U should be. Back of with the light until u get,it sorted
 
the lights are about 12 inches away and 150W LED Lamps in multi colour.

To be honest, the roots are not even that brown, i just took it out into better lighting to take a picture, here are some of the pics. Could i be facing something other than root rot? Could this be a case of nutrients lock instead? HELPPPPP

Ok i just dialed down the lights so that its not so strong now.
 

Attachments

  • IMG_3170.JPG
    IMG_3170.JPG
    969.2 KB · Views: 51
  • IMG_3173.JPG
    IMG_3173.JPG
    1,020.9 KB · Views: 54
  • IMG_3174.JPG
    IMG_3174.JPG
    2.7 MB · Views: 55
I,have seen a mite infestation cause a plant to look like that, you give a good chck?
 
Back
Top