Little help from the brains trust please..

Mumbeltypeg

Mumbeltypeg

Well-Known Member
Hello friends, I’m a bit unsure of where to go here.. I am having a reoccurring issue with my plants. I am new to using LEDs and am wondering if perhaps it is light stress effecting these girls? I’m doing my head in trying to get my head around all the nutrient imbalance info..
my room environment is dialed in and fairly tightly controlled with a climate control system in place.. am keeping PH between 5.5-6.5
Any help would be so greatly appreciated.

. mumbles
 

Attachments

  • F5CB0B1E-F6CC-4A73-A06D-70A5293754B9.jpeg
    F5CB0B1E-F6CC-4A73-A06D-70A5293754B9.jpeg
    4.4 MB · Views: 46
  • 7B9C3398-D32C-4E51-886A-CAFEBC08F1E2.jpeg
    7B9C3398-D32C-4E51-886A-CAFEBC08F1E2.jpeg
    4.9 MB · Views: 46
  • EB27A833-18B0-4909-AF44-2B665848802E.jpeg
    EB27A833-18B0-4909-AF44-2B665848802E.jpeg
    2.2 MB · Views: 48
  • C0921FF7-4F5D-4624-977D-92D315ADE464.jpeg
    C0921FF7-4F5D-4624-977D-92D315ADE464.jpeg
    1.5 MB · Views: 44
That plant needs magnesium. But it could also need magnesium because its locked out. Could b a little light stress as well. We need more info.
 
almostthere1 said:
That plant needs magnesium. But it could also need magnesium because its locked out. Could b a little light stress as well. We need more info.
Click to expand...

plant is grown in hydroton, using Professors A&B + flowerboost mixed to an ec of 1.5

Light is set at approx 850ppfd
Co2 at 1500ppm
Humidity 75-80%
temp 29.5c
no other additives.
 
I hope I’m wrong but it looks like you had some issues where they wilted
Maybe even before the flip ?
I run a two part that you need to mix two first then a bit of Epsom salt before adding 1 which is basically 15-0-0 nitrogen
But if you flipped em knowing you let ‘em get to dry they could look like that
Otherwise you program looks solid
If that is the case a bit of wetting agent might help to ride out the grow
Crazy you are maintaining that humidity in those temps though
 
Herb & Suds said:
I hope I’m wrong but it looks like you had some issues where they wilted
Maybe even before the flip ?
I run a two part that you need to mix two first then a bit of Epsom salt before adding 1 which is basically 15-0-0 nitrogen
But if you flipped em knowing you let ‘em get to dry they could look like that
Otherwise you program looks solid
If that is the case a bit of wetting agent might help to ride out the grow
Crazy you are maintaining that humidity in those temps though
Click to expand...

thanks for the help/advice, they might have had something like heat stress or something.. they are in clay balls and as far as I can recall they haven’t wilted.. just seems to be the one strain affects too, the gelatos fine but the skywalker has gone pale/yellow on me two cycles in a row now..
 
You must log in or register to reply here.
Back
Top