Light/Lamp

hey i was wondering will this light be dangerous to use in a ward - drobe, 4ft x 7ft, my friend thinks in a confind space it may cause problems, fire etc. anyway this is the housing.

ps. any ideas fpr set-up?

if you have proper ventilation and no electrical problems you shoould be fine

no electrical problems, but no ventilation, well one fan, a house fan about 16 inchs tall.

you will need some sort of intake and exhaust int that closet without it it ill not oly get to hot, the plants need the continous fresh air to survive

so ventilation is a definate?

very very much sooo

shit, what can i do i have no funds left!

You need to get a small fan or something. If you'll be vegging first, only run the light for 16 hours per day, instead of 18-24. Your plants won't grow as fast, but they won't grow at all if temps exceed 90 degrees.

i got a large house fan, the only thing i'm scared of is the bulb exploding or the ballast, is this possible? i was gonna do 12/12 so when i go to bed at night the light will be off, plus overhead copters won't see strange heat, also the boxing of the bulb says it can get hot to 300 degrees, what ya think i'll post my set up. brb.

ps. unfinished, so what are the odds?

Unless you have plants that are ready to flower, you'll need to run the light for at least 15-16 hours. The house fan will help, even better if it's the oscilating kind. Place the fan so it's blowing slightly upward, that way it will blow most of the heat from the lamp away from your plants. Here's the thing, if temps inside the box are over 90 degrees you should put your grow on hold until you can arrange a good exhaust system.

its69 said:

ps. unfinished, so what are the odds?

Click to expand...

It's definitely worth a shot, though I don't know if that little fan is going to cut it. Only one way to find out. Good luck.

ok cool, my friend is bringing a thermometer today, my seeds have only been potted today, so no rush for the light, might set it up and check the temp, i need to make a heat shield also around the light to.

Say, that's not aluminum foil that I see is it? If so, get rid of that shit quick. It's not a good reflector of light and it creates hot spots. Paint the inside flat white if you can, or line it with plain white paper.

no its not aluminium its electrical reflector i think it cost abit more than tin foil.

Hmmm, still don't look right. You might want to consider going all-white when you're able to make it happen.

haha oh shit that is tin foil yeh, to the far right?

its69 said:

haha oh shit that is tin foil yeh, to the far right?

Click to expand...

no thats not tinny thats good stuff, its heat reflector shield, you put them on cars n stuff in the summer so they dont get hot, i think. cept its on a roll.