Delusional
Well-Known Member
Alright... Here's the deal. I've got my veg room done. Now I'm moving on to the flowering room. Below is a diagram of what I have to work with. It is a basement room, quite cool during the summer. The house also has central air and there is a open ceiling with an exposed duct coming from above the next room a few feet on up to the ceiling. I'm not sure if this can be tapped into for anything but this duct feeds the house air\heat. There is a window to the east of the diagram which will be boarded and not used. There is a window in the south of the diagram which exists UNDERNEATH an addition to the house. This is absolutely PERFECT for a source of air as well as a vent for my ductwork. I wish to have a closed system to cool the lights and a vent hooked up to a can fan and a carbon scrubber. Something like 440cfm for the carbon scrubber, and another 200cfm for the lights. I'm going to be building my own aeroflo type system using pcv fence posts which have a uncut length of 8'. Basically I want to utilize this space to the very best of my ability and before constructing the aeroflo system need some help with a floorplan....
If you feel you got some ideas copy the image and map it out as you see fit. Ventilation? Lighting? Location and length of the aeroponic systems. (I'm probably going to go with 3 "tables".... each having roughly 30 3" cups. So figure a hps w/ vented reflector/cool tube for each.... there is also plumbing I can tap into here if that matters....
Hopefully a few people will help out and perhaps we can all form a final floorplan here I'll make reality. Any information you need from me, just ask. I'll keep on this thread until there is a final floorplan then I'll gather the items and we'll roll.
My budget is about $2500USD, I'd like to keep it wayyyyyyyyyyy under that if possible but thats what I have to work with so I figured I'd give you a realistic limitation.
Have at it! And thanks for all the help in advance.
If you feel you got some ideas copy the image and map it out as you see fit. Ventilation? Lighting? Location and length of the aeroponic systems. (I'm probably going to go with 3 "tables".... each having roughly 30 3" cups. So figure a hps w/ vented reflector/cool tube for each.... there is also plumbing I can tap into here if that matters....
Hopefully a few people will help out and perhaps we can all form a final floorplan here I'll make reality. Any information you need from me, just ask. I'll keep on this thread until there is a final floorplan then I'll gather the items and we'll roll.
My budget is about $2500USD, I'd like to keep it wayyyyyyyyyyy under that if possible but thats what I have to work with so I figured I'd give you a realistic limitation.
Have at it! And thanks for all the help in advance.