jdrt67
Active Member
My Question is will this Tester Be a good one to get it is only $17.00 and i need one pretty bad for cheap???
HANNA Instruments Primo Pocket TDS Tester, Meter
One free 20ml 1382 ppm TDS calibration solution and two extra free batteries included.
<<< The order of 11 or more will be dropshipped from HANNA, no extra battery included. >>>
* High accuracy * Exceptional linearity over the entire range * Automatic calibration with the press of a button
The Primo provides a fast and dependable way to measure the Total Dissolved Solids level in your water samples. It is ideally suited for the rigorous demands of water quality professionals, who will appreciate the practicality of the Primos easy-to-read Liquid Crystal Display when demonstrating the before and after results of conditioning and filtration systems. Temperature is compensated automatically to ensure the readings are consistent to the standard or reference temperature. Operating and routine maintenance has never been easier. The Primo TDS uses a single button at the top of the meter. Press it once and the meter is powered and ready for use. Press and hold the button for a few seconds and the Primo automatically enters calibration mode. Simply open a sachet of the calibration solution, dip the probe and within seconds, the meter recognizes the calibration solution and calibrates itself!
Primo is supplied complete with batteries and instructions.
Specifications:
Range 1999 ppm (mg/L) Resolution 1 ppm (mg/L) Accuracy (@20°C/68°F) ±2% Full Scale pH Calibration Automatic at 1382 ppm Temp. Compensation Automatic, from 0 to 60°C (32 to 140°F) Battery Type / Life 2 x 1.4V, 200 hours of continuous use Environment 0 to 50°C (32 to 122°F); RH 90% Dimensions 180 x 50 x 25mm (7 x 2 x 1") Weight 80 g (2.9 oz.)
HANNA Instruments Primo Pocket TDS Tester, Meter
One free 20ml 1382 ppm TDS calibration solution and two extra free batteries included.
<<< The order of 11 or more will be dropshipped from HANNA, no extra battery included. >>>
* High accuracy * Exceptional linearity over the entire range * Automatic calibration with the press of a button
The Primo provides a fast and dependable way to measure the Total Dissolved Solids level in your water samples. It is ideally suited for the rigorous demands of water quality professionals, who will appreciate the practicality of the Primos easy-to-read Liquid Crystal Display when demonstrating the before and after results of conditioning and filtration systems. Temperature is compensated automatically to ensure the readings are consistent to the standard or reference temperature. Operating and routine maintenance has never been easier. The Primo TDS uses a single button at the top of the meter. Press it once and the meter is powered and ready for use. Press and hold the button for a few seconds and the Primo automatically enters calibration mode. Simply open a sachet of the calibration solution, dip the probe and within seconds, the meter recognizes the calibration solution and calibrates itself!
Primo is supplied complete with batteries and instructions.
Specifications:
Range 1999 ppm (mg/L) Resolution 1 ppm (mg/L) Accuracy (@20°C/68°F) ±2% Full Scale pH Calibration Automatic at 1382 ppm Temp. Compensation Automatic, from 0 to 60°C (32 to 140°F) Battery Type / Life 2 x 1.4V, 200 hours of continuous use Environment 0 to 50°C (32 to 122°F); RH 90% Dimensions 180 x 50 x 25mm (7 x 2 x 1") Weight 80 g (2.9 oz.)