SimpleSimon
Well-Known Member
So i am going onto my second grow. i have decided to build a cab for them. I have watched FullMetalJacket build his cab, and am feeling a little in adequate.
I have come up with this drawing. I want to construct out of wood do to cost and ease of manufacturing.
I would also like to use some of the equipment i already have.
My carbon 33 filter
465 cfm blower
Blue end spectrum 125 cfl
Odor sok (don't have to use, but i have it)
400watt HPS (which i might put a switch in it to make convertable to MH)
I would like to make sure that i can still move it, so it will have to be on wheels. Also it has to be movable by two people (unloaded).
I was thinking about buying a reflector with cooling ducts and getting some small muffin fans to blow the air through. I haven't quite figured out what to do about the cloning room and mother room for air circulation. I was thinking about making the shelf that divided the two areas out of wire racking so that there could be one chamber for ease of ventilation. I was thinking of buying another CFL for the mother. Also i would like move the shelf in the flowering side rather then moving the light. This would keep the ducting neat and tidy. i would have to remove the plants to move the shelf up, but i think it won't be bad. I had hoped to keep the blower in the cab. But after drawing it up, i couldn't figure out where to put it. So thought i would mount it on the outside of the cab suspended by rubber rings. This cab is 4' wide and 5' tall.
Please let me know what you think. All criticism will be useful as changes are easier to make now on paper.
thanks
I have come up with this drawing. I want to construct out of wood do to cost and ease of manufacturing.
I would also like to use some of the equipment i already have.
My carbon 33 filter
465 cfm blower
Blue end spectrum 125 cfl
Odor sok (don't have to use, but i have it)
400watt HPS (which i might put a switch in it to make convertable to MH)
I would like to make sure that i can still move it, so it will have to be on wheels. Also it has to be movable by two people (unloaded).
I was thinking about buying a reflector with cooling ducts and getting some small muffin fans to blow the air through. I haven't quite figured out what to do about the cloning room and mother room for air circulation. I was thinking about making the shelf that divided the two areas out of wire racking so that there could be one chamber for ease of ventilation. I was thinking of buying another CFL for the mother. Also i would like move the shelf in the flowering side rather then moving the light. This would keep the ducting neat and tidy. i would have to remove the plants to move the shelf up, but i think it won't be bad. I had hoped to keep the blower in the cab. But after drawing it up, i couldn't figure out where to put it. So thought i would mount it on the outside of the cab suspended by rubber rings. This cab is 4' wide and 5' tall.
Please let me know what you think. All criticism will be useful as changes are easier to make now on paper.
thanks
Attachments
-
56 KB Views: 378
Last edited: