Easy aero res temp control

AeroDonkey

AeroDonkey

Member
I read about a lot of problens with aero systems creating heat so I figured Id share my fix for this. Using stinkys setup and using an intex pool pump that I got for 3 dollars on cl I relocated the pump to outside of the res using black water hose and clamps. First run used the whole pump intact, second I pulled the actual pump from the housing and res and used a heat gun GENTLY to fit 3/4 pvc to the inside of the output and used silicon, rubber grommet and hose to attach to the input hose to the lower part of the res. In dirt right now so no pics but worked great and made temp control much easier. I'll post some pics next time its all put together.

Just my $.2. :-)
 
Aeroknow

Aeroknow

Well-Known Member
AeroDonkey said:
I read about a lot of problens with aero systems creating heat so I figured Id share my fix for this. Using stinkys setup and using an intex pool pump that I got for 3 dollars on cl I relocated the pump to outside of the res using black water hose and clamps. First run used the whole pump intact, second I pulled the actual pump from the housing and res and used a heat gun GENTLY to fit 3/4 pvc to the inside of the output and used silicon, rubber grommet and hose to attach to the input hose to the lower part of the res. In dirt right now so no pics but worked great and made temp control much easier. I'll post some pics next time its all put together.

Just my $.2. :-)
Click to expand...
To really get it rite, a rez chiller is usually the safest bet. Putting the pump outside the rez(one made for it)def helps. Peace
 
vostok

vostok

Well-Known Member
Aero as in aero-ponics the art of growing plants in an atmosphere of AIR with nute aided steam unlike those who grow in water known as Hydro-ponics or DWC deep water culture, your roots are in water its Hydro or DWC, your roots in steam or mist(M.I.S.T.) ....thats aeroponics ....go figure
Many cloner or bubblecloner operators learn quick to maintain there temps with heat from the pump alone save on adding a fish heater rod saves bucks
 
Aeroknow

Aeroknow

Well-Known Member
vostok said:
Aero as in aero-ponics the art of growing plants in an atmosphere of AIR with nute aided steam unlike those who grow in water known as Hydro-ponics or DWC deep water culture, your roots are in water its Hydro or DWC, your roots in steam or mist(M.I.S.T.) ....thats aeroponics ....go figure
Many cloner or bubblecloner operators learn quick to maintain there temps with heat from the pump alone save on adding a fish heater rod saves bucks
Click to expand...
Allot of aero setups(like an aeroflo setup)also have a "shallow water culture" thing going on in the bottom of tube. High temps can easily cause bad shit to happen
 
You must log in or register to reply here.
Top