Diy 5 gallon buckett aerocloner! Took 5 min.:)

Eharmony420

Well-Known Member
Well, I ws about to buy the super mist aerocloner for 100 dollars. But, I thought screw it.;-)

I went to home depot. I bought:

4 8-1/2 3/4 in pvc peices. 4 dollars, i bought extra. now I could do it for a dollar total!
4 3/4 in pvc elbows like 60 cents ech.
1 3/4 in pvc t hose adapter like 60 cents
2 feet clear hose like a few dollars? i has some extra. cheap!
bucket 3 bucks
lid like a dollar I think.
7 green sprayers like 5-10 dollars depending. not at all a tough call to stress over. all mostly the same.
a drill 20 dollars on ebay
a drill bit slighly smller than mister bottoms. (looks the same) like 5 bucks
a 396 gph pump I got for 20 dollars off ebay. 20 dollars with shipping on ebay
something I was told was sativa.

Not very much money you can see. I had the pump already and the misters I bought from hid hut a long time ago.

I put all this together. Their is no stand for the mister unit. It just rest against the sides of the bucket. I bought the wrong leg peices and realised it when I got home. lol, it works fine, been running 24 hours and not one problem.

This took 5 min literally. I used no glue, at all. When I ws done the sprayers just plopped right into the holes. I have to say this was the easiest build I ever did on anything. The sprayers fit like they were meant to. Maybe they are.

I put off building one of these as I thought their would be DIY vriables and probs and would be a nightmare. Not true. SO easy, and so much cheaper. I think better.
:eyesmoke:
here are some pics. I am running ro water and hydroguard. No gunk yet, that can happen with hydroguard as it is organic. I think if I dont mix superthrive with it I will be fine. If i did I could pull the misters easily and clean.:eyesmoke:


:twisted:
 

Attachments

Eharmony420

Well-Known Member
when picking misters I used the green ones from hid hut. I love that place.

just make sure that when you buy them that the lister "pole" is straight and a screw in peice.

remember that. some are made to be pushed in to rubber hose. No good for pvc.
 
Top