Bruce banner 3#

I’ll show couple big Bruce banner.
One the turps are changing to light purp a the other Rich green . Just little show of proud father an his second attempt at indoor sog .
Hopefully some avid enjoyers will reply an enjoy

Tanki gents

Healthy plants. I grew Bruce banner outside this year. 1 was 12' tall sativa leaning. The other was about 9' and squatty. Short one got covered in rot, still pulled 3lbs off those two.

cannabiscrusader said:

Healthy plants. I grew Bruce banner outside this year. 1 was 12' tall sativa leaning. The other was about 9' and squatty. Short one got covered in rot, still pulled 3lbs off those two.

Click to expand...

One’s very healthy the one with purple in is not as healthy I did her a few bads but they coming along an luckily I could work out my bads before they bit my arse to hard the purple one took bit of light damage she seems to be recovering from nicely luckily caught in time . I hope to get two pounds out of those two roughly metre square each I did a lot of under work to get those to look like that you should see under them I’ll take pics an show under.
I so understand now why people short crop I’m not likely to do this same method again.
Although I love learning I also like fruits of my labours to reward me this is less then I hoped better then I thought so one can’t complain I see though why an what they mean about experience being needed on some strains these showed me that been long time since I last grew an never led indoor my second crop my 1st sog .
Second in a way due to I had many small plants making a sea of green last time it’s more what I’ve seen of sog an I went as far as to put on netting..

The other

Nice job training. I use rose stem wire like that too. I don't allow as many branches/sites. I prefer fewer, but larger branches that stack up nice. No right or wrong way, just how I do it. This type of training works perfectly whether I'm running a lot of small plants (sog) or a few larger plants or a mix. Plus it's fun as hell to bonsai train the crap out of them.

MtRainDog said:

Nice job training. I use rose stem wire like that too. I don't allow as many branches/sites. I prefer fewer, but larger branches that stack up nice. No right or wrong way, just how I do it. This type of training works perfectly whether I'm running a lot of small plants (sog) or a few larger plants or a mix. Plus it's fun as hell to bonsai train the crap out of them.

Click to expand...

Yes it is indeed I like to be able to see over them all a yeah I totally agree so many ways no right wrong as long it’s healthy your ways working for you .
Yeah this was my 1st big sog so just trying to find a happy medium I do love the hands on bit but to a degree the work in those has been fuckin massive cause it’s first time at it I tried a 6 an a 4 to get exactly what your saying I didn’t know I thought I’d gone to far removing branches so I was stoked to see so many good heads (flowers) across the sog

What I found was inside the tent I have 5x5 I blocked my ability to work around the plants next time I did this I’d make sog net single to each plant to be able to slide an or get around if needed

Here's the sativa leaner



And the indica leaner



Roots from the big one, I'm making a walking stick when it dries enough




I plop clones in a sip. Plain water. No topdress after. Lid stays on with a net bolted right to it. Easy as it gets.

cannabiscrusader said:

Here's the sativa leaner

View attachment 5347662

And the indica leaner

View attachment 5347664

Roots from the big one, I'm making a walking stick when it dries enough

View attachment 5347665
View attachment 5347666View attachment 5347667

I plop clones in a sip. Plain water. No topdress after. Lid stays on with a net bolted right to it. Easy as it gets.
View attachment 5347670

Click to expand...

Nice looking plants mate very can’t say as I’ve had the pleasure of so larger a lady

cannabiscrusader said:

Here's the sativa leaner

View attachment 5347662

And the indica leaner

View attachment 5347664

Roots from the big one, I'm making a walking stick when it dries enough

View attachment 5347665
View attachment 5347666View attachment 5347667

I plop clones in a sip. Plain water. No topdress after. Lid stays on with a net bolted right to it. Easy as it gets.
View attachment 5347670

Click to expand...

Could you access the very back could you get around back an open other side looks like you would on encountered the same hard to service rear with out complete access

Sergeant420 said:

Could you access the very back could you get around back an open other side looks like you would on encountered the same hard to service rear with out complete access

Click to expand...

Access isn't so bad. I can unzip that side, the other side of the 4x8 is up against my veg cabinet.



I'm 6' 190 pounds and had multiple surgeries. Even when I was 250, I could lay on my back and trim from underneath between the sips. I just make sure my bowl, lighter, and water are close by. Tunes cranked, shades on, toking on my flavor of the week. Sweet life this is

This one is a breeze to service

cannabiscrusader said:

Access isn't so bad. I can unzip that side, the other side of the 4x8 is up against my veg cabinet.

View attachment 5347689

I'm 6' 190 pounds and had multiple surgeries. Even when I was 250, I could lay on my back and trim from underneath between the sips. I just make sure my bowl, lighter, and water are close by. Tunes cranked, shades on, toking on my flavor of the week. Sweet life this is

This one is a breeze to service

View attachment 5347690

Click to expand...

Lmao it’s how I did it on my back squeezing between pots . A yeah I got my veg cab about against my main too lol but I can’t get around behind it at all .

Not legal in Aus so I kinda got to bend an shape everything to be able to achieve my outcome lol

Variety of shit in veg cabinet atm but I have decided fur Christmas it was all flower so I fit one kush mintz 2 gorilla cookie an one Bruce two peanut butter breath coming along 1st week flower

I thought about putting the sips on elevated rollers so I can just pull them out like a drawer in a filing cabinet. Maybe down the road, I'm too busy for that noise now

cannabiscrusader said:

I thought about putting the sips on elevated rollers so I can just pull them out like a drawer in a filing cabinet. Maybe down the road, I'm too busy for that noise now

Click to expand...

Good idea big draw