Best EU light on market plug and play
- Thread starter KonopCh
- Start date
KonopCh
Well-Known Member
Ideal for scrog setups, that way you minimize wall losses because you hang light closer to canopy. Gives you better coverage than COBs or QBs, more diodes, higher efficiency and thus more yield. 1.5 GPW should be easily reached and up to 2.5 GPW. Wattage depends on driver selection, growth area and your wishes. Send me a message and I will help you decide. You can pay with crypto (BTC, LCT, ETH...). Up to 2.8 umol/s, up to 220 lumens per watt. For info HPS is only about 125 lumens per watt and we must count 20% wall losses and 10% reflector losses too.
Those Samsung strips has more than 50.000 hours of life time. Save electricy and save on light, no more bulbs changing!
Light ALU frame for better heat management, no noisy fans, only passive cooling. Strips are glued to frame with thermal tape for better heat dispassion.
Light is 60 x 117 cm (10 strips on picture, 250W), I can build (plug and play) various frames for your grow area. Samsung strips can be 559mm or 1120mm long, width and number of strips is up to you how much efficiency do you want. Send me a message and I will help you decide what's best option for your grow area.
I have two lights as picture above, 2.7 umol/s, 183 lumens per watt, 3000K 80 CRI, 500W for 4x4 tent. Roof of the tent is like a clear sky with the million of stars.
PSUAGRO.
Well-Known Member
You almost sold me, nice hype
.............2.8umol/j, you have no idea what your system efficiency is, just a guesstimate from the data sheets.
FYI you can run a Philips 3100k cmh bare-bulb/vert and get almost 2ppf/w, a 600w SE hps bulb is 140+lm/w @ bulb level if also run vertically. Still, you can get an efficacy bump with sammies no doubt.....
.............2.8umol/j, you have no idea what your system efficiency is, just a guesstimate from the data sheets.FYI you can run a Philips 3100k cmh bare-bulb/vert and get almost 2ppf/w, a 600w SE hps bulb is 140+lm/w @ bulb level if also run vertically. Still, you can get an efficacy bump with sammies no doubt.....
KonopCh
Well-Known Member
Numbers are not wrong, dude.You almost sold me, nice hype
FYI you can run a Philips 3100k cmh bare-bulb/vert and get almost 2ppf/w, a 600w SE hps bulb is 140+lm/w @ bulb level if also run vertically. Still, you can get an efficacy bump with sammies no doubt.....
However, with your HPS bulbs, they are.
I will not trying to convince you, there are millions of threads over the internet which speaks for themselves.
Still, HPS dudes will always be for HPS. But hey, tech goes on!!
PSUAGRO.
Well-Known Member
Phillips elite agro 315w cmh (3100k) on a Phillips ballast(220v) got 1.96ppf/w in an integrating sphere........ running VERTICAL BARE BULB eliminates reflector losses == your plants become the wall, also eliminating losses
Cobs, qbs, can be as efficient as strips depending on current, amount used......
Cobs, qbs, can be as efficient as strips depending on current, amount used......
Last edited:
