any ideas to mount 12" oscillating fan in a 4 x4 ?

Nizza

Nizza

Well-Known Member
www.gorillagrowtent.com

Gorilla Grow Tent Gear Boards

Organize your indoor grow tent set-up with these indestructible gear boards. It snaps to your existing tent poles and helps maximize space by removing floor items from your growing area. Hang large oscillating fans, meters, and monitors up in the air and off the floor.
www.gorillagrowtent.com www.gorillagrowtent.com
perhaps one make something like this or order it and put a platform off of it?
 
morugawelder

morugawelder

Well-Known Member
Nizza said:
www.gorillagrowtent.com

Gorilla Grow Tent Gear Boards

Organize your indoor grow tent set-up with these indestructible gear boards. It snaps to your existing tent poles and helps maximize space by removing floor items from your growing area. Hang large oscillating fans, meters, and monitors up in the air and off the floor.
www.gorillagrowtent.com www.gorillagrowtent.com
perhaps one make something like this or order it and put a platform off of it?
Click to expand...
yeah , just trying to come up with a plan , seen a idea someone had using a 1 x 3 , zip tied at the top and bottom of frame , mount it to that ,
 
P

piratebug

Well-Known Member
get you some of that flexible lamp conduit, a 6 inch piece of 1 1/2" x 1 1/2" wood that that has a 1/2" 45 degree deep "v" cut out down the center on each side of that 6 inch piece of wood, then mount one side of the wood to a tent pole and then mount the flexible lamp conduit to the other side of that 6" piece of wood and then use zip ties to mount it, then just mount your fan to the end of the flexible lamp conduit. Then you can move the fan wherever you need the most circulation around your tent!
 
DCcan

DCcan

Well-Known Member
I put a couple corner shelves similar to this in with a 24" oscillating tower fan, just hang it from 3 ratchets on the top corner..works great, doesnt block light .
Slip the corner pole thru the hole; raise and lower with the canopy height with the fan, or use it to propagate smaller plants as needed
 

Attachments

diggs99

diggs99

Well-Known Member
Small strip of wood , some electrical ties, fasten wood to poles with ties, osciallting fan attatches to wood, problem solved.

I used a small piece of door casing I had laying around. I think it was 2.5" wide and I cut it to same height as my tent. Worked like a charm.
 
morugawelder

morugawelder

Well-Known Member
Thanks , thats what I'm gonna do . I got a 12 " oscillating fan I need to get up off the floor ,
taking up to much room , 6 " oscillating on another pole ( clip on ) .
 
Nizza

Nizza

Well-Known Member
damn renfro you already know about all that? man I do hvac for a living and all the info you ever give is dead nutz great info
hope you realize you're a great help all around man , gotta give you mad props.

they make some sort of saran wrap type UV guard if you're ever worried about that, some people use it on outdoor linesets but it looks ugly I usually do the gutter-guard type stuff for clients

saw your posts about dual 12-12 chambers switching on-off cycles to keep hheat up, that type of info is priceless man.. keep it up
you ever thought about writing a book?

this would go in the safety section :D
 
Last edited:
ilovetoskiatalta

ilovetoskiatalta

Well-Known Member

Anyone know of any good pole fans?

So Ive been trying to look for fans for 4x4 Apollo horticulture tent... but all I see are wall mounted fans? I don’t mind using a wall mounted fan but how would I set it up? I don’t wanna drill holes in my tent or the wall? I purchased a clip on fan thinking it would clip onto the poles but it...
www.rollitup.org
 
Goodlandkush

Goodlandkush

Well-Known Member
^^ that’s in a 2.5’x5’ tent with a 12” hurricane oscillating fan. A little over kill for this size tent, so I’m going to purchase a 6” Vivosun oscillating fan for this tent and put the 12” hurricane osc. Fan into the new 4x4 I got
 
You must log in or register to reply here.
Top