What is the best combination between PHRESH filters and CAN-MAX fans for optimal odor control in this 140 cubic feet area? I cannot stress this enough, but what I'm going for is no odor and for it to be EXTREMELY quiet. Another thing is that I do not plan on punching a hole through the wall so INLINE circulating a sealed off closet with CO2 seems optimal. I will be using LED so heat will not be an issue. Opinions will be most grateful
nothing really they are just makers of carbon filters with 2 different designs of metal but active carbon is the same
the whole thing with carbon filters is the prefilter dust trap (clean replace every 4 months or 6) ....match the CFM rating of the fan to the filter .........and the active carbon in the filter is only effective for 12 to 15 months of sucking ...after that the filter needs to be replaced or the active carbon does
now active carbon can be reused if u have a autoclave to steam and pressurize the carbon to remove the smell .........so unless u have access to one the used carbon is no good
what u are asking about is called air polishing
here ......this is premade air polisher u can hang ....that are refillable carbon ......i owe 2 of their filters saves me money the 2nd year carbon was less then 20 bucks from them
http://www.ebay.com/sch/foothill-carbon-filters/m.html?_nkw=&_armrs=1&_ipg=&_from=
ok u asked for a 140 cfm as this does not dump the air out only cycles it removing smell .........u can go a larger stronger one if u feel u want it (cycles the air tho 2/3/4/5 times a min or something)
if u get heat issues later just add a swamp cooler it will keep co2 in the area just cool the co2 down and make like a fountain effect if u have fan blowing strait up
https://www.rollitup.org/Journal/justugh.597604/