2-in-1 for flower/dry?

Has anyone used one of these and connected the vent holes to be able to have a single exhaust fan and carbon filter? I don't have the center divider in right now, but I'm getting ready to harvest and need a place to dry while My other 2 finish up. Its 2x3x4.5ft and split its 2x2x4.5 and 1x2x4.5 (the shelf is removable ).My other 2 Will for in the 2x2, but I dont know If a 195cfm fan will be enough to pull from intake (drying side) over to the flower side and out. Anyone tried this?

cirE said:

Has anyone used one of these and connected the vent holes to be able to have a single exhaust fan and carbon filter? I don't have the center divider in right now, but I'm getting ready to harvest and need a place to dry while My other 2 finish up. Its 2x3x4.5ft and split its 2x2x4.5 and 1x2x4.5 (the shelf is removable ).My other 2 Will for in the 2x2, but I dont know If a 195cfm fan will be enough to pull from intake (drying side) over to the flower side and out. Anyone tried this?

Click to expand...

I didnt know you dont have to install the divider on those. You shouldnt be drying with an exhaust fan. Drying requires minimal air movement. Lotta people put their shit in a paper bag, staple it shut, and wait 2 weeks.

This is how it is without the divider. The divider goes where the thermometer is. I thought there should be some air movement? If I Dont need any air movement, I can just seal off one side completely...

cirE said:

This is how it is without the divider. The divider goes where the thermometer is. I thought there should be some air movement? If I Dont need any air movement, I can just seal off one side completely...

Click to expand...

Depending on the humidity of the room.... I use my tent for drying and i just crack the door open a little bit. if the room is 30-40rh, i get a 11-14 day dry.

JoeBlow5823 said:

Depending on the humidity of the room.... I use my tent for drying and i just crack the door open a little bit. if the room is 30-40rh, i get a 11-14 day dry.

Click to expand...

That sounds like mine. If I just water it's around 40-50, after the first day it drops between 30-40. I'll just seal off the one side then. Now I have another question, I'll have to move my carbon filter and fan to make my light fit when I put the divider in. In trying to keep it somewhat stealth (just so my kids dont get curious and go in my closet) i want to keep the fan inside to keep the noise down. Right now the fan/carbon filter are horizontally at the top next to the light. When I move the light over, can I put the fan/cf vertically along the corner to save space?

cirE said:

When I move the light over, can I put the fan/cf vertically along the corner to save space?

Click to expand...

Yes. Might be a bit of a bitch hanging it in the corner but yes thats fine.

cirE said:

just so my kids dont get curious and go in my closet

Click to expand...

They will anyway.

cirE said:

I'll just seal off the one side then

Click to expand...

dont completely seal it. leave the top of the door cracked and intake vents open. just so a tiny bit of air moves through it.

JoeBlow5823 said:

Yes. Might be a bit of a bitch hanging it in the corner but yes thats fine.


They will anyway.


dont completely seal it. leave the top of the door cracked and intake vents open. just so a tiny bit of air moves through it.

Click to expand...

I'll be putting that divider up in the next couple days. Thank you!