Search results

My AC unit (traditional split unit) takes too long sometimes to cycle on. The Honeywell thermostat will flash "Cool On" for 3 or 4 minutes before turning on solid and the compressor and fan actually fire up. This is a time delay to protect the compressor I believe. This is creating large temp...

I just turned on my new HID setup and the AC is working hard and ripping all the humidity out of the room.. currently sitting at 88F 22RH 1400ppm co2 sealed room.. I would dim my lights but they are brand new bulbs and you are not supposed to dim at first. not sure why my ac is having...

I did buy that condensate pump I linked above. I am super happy with it. I clogged it up once the first day with some plastic shavings but it has been running good for over week now. It has 4 holes for I can hook up all my trays and my dehumidifier.

hah creative!

https://www.homedepot.com/p/Everbilt-120-Volt-Condensate-Pump-w-Hose-EB-PUMP-T/308593413#overlay I can swoop this up locally today.. 1.6 gal/minute is a lot less than your 1100gal/hr .... but I am using Rockwool so I assume I will have a lot less run off? and maybe this 1.6gal/min would keep...

awesome! that is just what I have been searching for! was trying to find your exact pump and ended up finding this condensate removal pump. which might save the effort of building the pump rez... https://littlegiant.com/products/hvac/condensate-removal-pumps/vcm-vcc-series/vcma-20-series/

oh hope someone can help me come up with a solution quickly for this issue.. I am using rolling benches and drain to waste. -12 inches off the ground (these are low benches. not much room under) each bench slides about 8 inches to each side, so location of flood drain/trays are moving.. I...

cool, thanks ya i've never used multiple inline fans, inline... but i have a 10" and 12" floating around so i will consider using them.. I was looking at how the intake fans are kind of lined up to where they might be "fighting" each other for air... should i create some way of separating...

I love the concept of pocket doors and wish i could make them work... but I am looking for strong sealing entry ways that can keep as much light and air from spillling as possible and I have had no luck getting that with pocket doors.

having two intake fans pulling from the same space/window shouldn't be a problem? i would like to find a way to avoid heating during "lights off" something like exhausting veg room heat into flower room (instead of blowing outside) but i think there would be positive pressure issues? anything...

just realized I could add a wall before the water tanks.. allowing access for the intake fans to window air.. and blocking light/air from entering water tank zone..

trying something new here and wanted to ask if anyone sees a problem.. creating hybrid flower/veg rooms that have traditional active intake and exhaust fans as well as co2 generators and split ac. so traditional combined with CGE sealed room. as you can see in the picture both rooms pull...

ok thanks those are interesting.. I will research them some more.. it says those panels are .06 inches thick.. that can't be right... I have decided I should use something with better insulation value than just panda film covering the insulated wood framed bays.. either sheetrock or these...

I guess you are suggesting that wall paneling? what is with the heat exchanger stuff? panel looks interesting.. I already have enough plywood to use on walls i might be leaning against.. besides some added insulation, structure and sound is there any reason just using panda would be a problem?

uhhh what?

good point! but i actually will only be able to lean against one wall, i have some old plywood sheets, so i will use them on that wall.. and the other walls will be impossible to lean against as flood trays will be blocking them. thanks for pointing that out! my ceiling is already sheet...

here is a little model of the space. two windows on the left side (yellow) to the right of the space is more garage. the other sides=exterior walls

I am doing a major remodel to an indoor garden. my plan is to convert a room 26'x14' into two rooms. a flower room (18x14) with 12 1000w DE gavitas a veg room (8x14') with 3 1000w DE I already have a central air con unit ducted to both zones. both rooms would share a wall. I want to make a...

hah yes! i was just trying to find those FloraFlex systems.. i watched a youtube video of someone setting those up and they look solid! but i forgot the name and couldn't find them so thanks! interesting what you said about plants under LEDs.. right now i have my eyes on the Gavita 1700e.. I...

im leaning towards rockwool. with two trays, I could try both! question i got asked today.. and don't have a clue.. how much water would a garden like this take? (rockwool, top auto feed, 6inch cubes, 24 plants finishing 3.5ft tall.) just a rough idea.. working with Well water and his well...