Search results

i very much doubt it. it will just be single channel.

yer im the same.. old habits from my sodium days. and not all my drivers are not dim to off. but if you have a light that is dim to off these spiderfarmer controllers dont look bad.

obviously will have to be dim to off drivers like...

they have an adapter listed for 0-10v lights and for pwm controlled fans so would imagine with a bit of messing you could get more less any lights/ballasts running on these.

https://docs.rakwireless.com/Product-Categories/WisBlock/RAK13004/Quickstart/#prerequisite

16 pwm channels per expansion board. im not sure if you can run more than one pwm expansion board per wisblock base/esp32core, because it depends on how many io pins are used by each expansion.

and not having day and night modes is a massive oversight...

worth mentioning that if your from the uk or europe you cant get the full range of accesories for these yet. there is no 10volt usb c powerpack available or any 240volt smart sockets...

@TechSmartSolutions, @Rocket Soul have you seen the rak wireless stuff? https://store.rakwireless.com/collections/wisblock-base you can put more or less anything together with the rak gear its amazing. to mimic what the op has done you would need 1 rak wisblock base, 1 wisblock esp32 core and...

thats quite impressive.

problem is you cant buy a light like that?. my simple years are long behind me. :bigjoint:

if in flower you have a strain with really tight/dense bud structure really pump channel 3 in bulk (like a 1:1 ratio of 660 to 730 nm) for a more sodium look a like bud. if again you have the opposite something a bit loose/fluffy (admitidly this is rare when growing under normal off the shelf...

all the above is obviously strain dependant, but if you have something that is very small and compact not much stretch in early flower try more channel 2 and channel 3 in veg and stretch. if you have the oppostite something tall and leggy that stretches for fun and has poor internode/bud spacing...

i would have added some uva but i dont hink led-tech has any modeled in its simulator. i would run the mint evos and all the blue monos on 1 channel then the pro9's and 660 on a second channel then just the 730nm on a third channel. a one light does it all solution - veg - run more channel 1...

i had a quick play with led-tech system configurator , i used the 3000k blux f90 as a stand in for the pro 9's and added mint evo's at a ratio of approx 2:1 (2 f90 to 1 evo mint), then added some monos to fill it out. using the 3000k pro 9's should lift the efficiency a bit and fatten out the...

how are you thinking of using the pro 9's? as a standalone or mixing it with another white midpower and/or monos?.

exellent info... thanks for that.

r are you saying the blux f90's are using the same ksf phosphor that the pro 9's are using?. can you remember what the numbers were for eficiency?.

i dont see how its the opposite?, they are more or less the same spectrum. apart from cree offering 3 different spectrums with differing amounts of blue. its clear this is a push for efficiency (the same as the mints) as they like you say strip out as much of the red from the whites as possible...

the pro 9's are cob and high power form factor only no mid powers.