Search results

Interesting I get the Pink bacteria turds in my toilet sometimes. :spew:

What money I saved on the fan got spent on the humidifier. Could have done quite a bit cheaper with a cold mist reptile humidifier and home assistant but decided to go with one that can put out cold or warm mist. So Winter time Warm mist will be used and in Summer when the AC running the Cold...

I pull buds threw out the flower cycle on a clone cured and smoked each sample while sober. Picked the one that I liked the high the most. Harvest at that time now when running that strains clones.

Biggest problem with blumats is most people growing MJ use around a 3rd of aeration in their soil mixes. So when you push the Blumat into the soil you get even more aeration contacting the terracotta clay on the blumats causing issues. If you pull the blumat back out after insertion and line the...

Yeah that is wired in parallel and should work fine.

The Dimmers Showed up today No dip switch, They added right to Zigbee2MQTT and show up as this controller that I am guessing uses the same chip https://www.zigbee2mqtt.io/devices/YSR-MINI-01_dimmer.html . 100% they put out 9.9 volts 50% 3.5volts and at 1% they put out 780 mV. There is no zero...

Ended up getting 4 more s31's @ 6 dollars a pop. Checked them with a watt o meter and they all are within a watt of it. But nice to know they can be calibrated from the console. Still No update on the tracking of the zigbee dimmers in 5 days now, Hopefully they will still get here this week. I...

These Ro Floats are pretty small if you have a ro system just add a T to the output line then never have to fill up the humidifier again. You would have to drill a hole in the tank though but it could always be patched up with some JB Water Weld. Added one to my Blutmat reservoir yesterday no...

Going to create better air flow and it will filter more stink out of the air before needing to be refilled or replaced.

This one here looks like it has a dip switch that will let you set it to a true 0 to 10 or 1 to 10 But it for sure is not on the front of the unit. Can also be wired to a switch.

Yeah I paid a few dollars more for the dimmers because they shipped from the USAor so they say . All the other listings would have got here in October and shipped from China. Pretty sure the ones I bought drop shipped from China they just charge a bit more and use Air Mail tracking says it was...

No Dimmers yet tracking says they are in Compton CA hopefully they will make it out safe. Bought two of them. Should be here by Friday. The Zigbee gateway is already here and one remote zigbee device working great.. Have quite a bit of zigbee stuff on the way 3 pack of temp and humidity, some...

You don't need much light i keep mine under a 60 watt Cob LED.

Found a zigbee 0 to 10 volt dimmer that will work with meanwells. Was leaning towards getting a zigbee hub for the sensors I want to get anyways so this might just seal the deal...

That sounds promising I will check those controllers out. Going to test my soldering skills out with some Sonoff S31 they have energy monitoring but lots of people are taking them apart soldering in a usb to TTL adapter and flashing tasmota on them so they work with HomeAssistant. After...

I have the dimmer hooked to a cheap 12 year old ac 6 inch Duct fan I have been dimming for years. Works fine when you first set up the Dimmer Switch in the app you can set a minimum dim point I don't like dimming a fan lower than 40 %. so when setting the dimming to 0 and the fan stays on 40%...

Some weird specs though 300 watts incandescent and 150 watts LED. The fan i have only uses 60 watts so not a issue for me

Yeah it is amazon prime though, might cost more for non primers https://www.amazon.com/dp/B09DT173R1?ref=nb_sb_ss_w_as-reorder-t1_k0_1_4&amp=&crid=37SSHLKVIGZYM&sprefix=kasa&th=1

Decided to go with Home Assistant. adding 4 plugs to the 69pro+ would have costed 80 dollars they want 20 dollars a pop for those. Bought 4 15amp smart plugs for 23 dollars. So pretty big savings with that. Bought a 19 dollars 300 watt dimmable smart plug and that will be used for the fan. The...

@cobshopgrow Thanks For that awesome info home assistant looks great already have a 12 dollar temp / humidity sensor that should work with HA. So i am saving money already. Put the Controller 69pro+ on hold right now was hoping they would update their combo deals since I need a new fan also...